5 Quick Methods to Bypass Vivo V29e FRP

Google Factory Reset Protection, a.k.a FRP, is developed by Google for all Android phones. It adds an extra layer of security to your phone and the data on it. It is aimed at making it difficult for the illegal holder of your phone to factory reset your phone and remove tracking information. Then why do we need to discuss the Vivo V29e FRP bypass?

Though the protection is meant for you, sometimes you may forget the password and want your Vivo V29e FRP removed. Also, if you bought a used phone and the previous user has set up FRP with her password, you need to bypass it.

Part 1: In what cases does the Vivo V29e FRP bypass works?

How and why should I bypass Vivo V29e FRP? Let us look at the valid reasons.

1. Buy a locked second-hand Vivo

When you buy a second-hand phone, ideally, the previous user must format and hard reset the Vivo phone to remove all locks and password requirements. However, if it doesn’t happen, you cannot use some options on your phone and configure security because of FRP. Here, your savior is the option of the Vivo V29e FRP bypass.

2. Forget Google account ID and password

Even if you have locked your Vivo phone yourself, you are stuck when you forget your Google username and password. So, you can only recover your phone using the Vivo V29e FRP bypass.

3. The person with a Vivo from his company no longer works for it

Some employees also receive official phones from their company which they have to return when they leave the company. Now, it becomes a horror story for the new employee if he gets the same phone locked with the previous user’s ID.

Part 2: 5 quick methods to bypass Vivo V29e FRP

Ok, now this is established that there are certain situations when you need to conduct a Vivo V29e FRP bypass. So how do you do the Vivo V29e FRP bypass?

Method 1. Retrieve your Google account from another device

If your phone is locked with a Google account whose password you do not know or have forgotten, then you can use this method to Vivo V29e FRP bypass. In this method, you can try to retrieve your Google account from another device. It is a simple step-by-step process tha can be completed from a PC or another mobile device.

If you have forgot the email address but remember the password, then follow these steps.

1. Navigate to Google’s Find My Email page in your browser.

When you can’t remember the email address that was configured, go to the Find My Email page and start account recovery process.

2. Enter your recovery email or phone number

On the next screen, provide a recovery email or phone number and click Next.

3. Provide your first and last name

Enter your first and last name in the given form and click Next.

4. Verification code

Google will send a verification code to the setup recovery email or phone number, click Send.

5. Verification code entry

Check your email inbox or phone messages depending on the recovery method and find the verification code. Enter it in the given form. If it is correct, you can go to the next final step.

6. Choose an account

From the list of accounts showing on the screen, select the account you want to recover.

7. Enter your password

Enter the password in the text box and you are done.

If you remember the email but not the password, then the Vivo V29e FRP bypass method will go like this.

1. Google’s Account Recovery page

Navigate to the Account Recovery page from the browser on your PC or other mobile devices.

2. Enter your email address

Fill in the form with your Google account and click Next.

3. Enter the last password you remember

The next form will ask you to enter the last password you remember and that worked

Now, you will receive a message to your registered device, to verify it’s you. Open it and click , Yes, it is me.

Now, wait for six hours for Google to verify it’s you and then they will send a password reset link to your email.

Now, what if you can’t remember your last password, then use the next method.

4. Click on “Try another way”

Now Google will send a message to your phone to verify it’s you. On your phone, open the message and click Yes, it’s me.

After verification, Google will send you a password reset link after six hours.

If your phone is not registered in your Google account then, try the next method.

5. Click on “Try another way” again

If your phone is enabled to check for the code, click Try another way again.

Google will then ask you to send a verification code to your registered phone number. Click Send.

Find the code from your messages, enter it, and click Next.

Now again, you will wait for six hours till Google sends the password reset link to your email.

Method 2. Use FRP Bypass APK

FRP bypass APK is another tool you can use to Vivo V29e FRP bypass easily. Let us see how it works step by step.

• Download FRP Bypass APK for Vivo V29e FRP bypass android 11.
• Once it’s downloaded, open the File Manager using the Open Files app
• Find the suitable Apk and click on it
• Install & open the APK.
• Open the browser on your phone.
• Launch any of these two below URL.
  • https://tiny.cc/frptools
  • https://bit.ly/2NKxXYs
• Go to the FRP bypass APK >FRP APPS section
• Open Settings leading to the Vivo V29e device Settings>System Settings> Backup & Reset >Reset Phone
• Now click on Reset System Settings Only, and confirm Reset System Settings Only.
• Select Erase All data and confirm.
• Your device will be rebooted.
• Wait till the factory reset process completes.

Now, reboot your device and set it up according to your requirements.

Method 3. Deactivate FRP

Another way to come around Vivo V29e FRP bypass is to deactivate FRP. Let us follow the step-by-step process.

1. Launch the “Settings” app and scroll to the Apps.
2. Click on the “Manage apps” (applications) and then the “All” tab.
3. Open “Google App.”
4. Click on the “Clear cache” to remove the Google account cache.

5. Also, clear all data to erase data stored.
6. Click the “Back” button, and go to “Gmail.”
7. Click on the “Clear cache” and “Clear data.”

8. In the Vivo V29e device Settings menu and click “Data synchronization.” When your device asks you to enter your Google account, enter your new Gmail account.

You have successfully completed the Vivo V29e FRP bypass process.

Method 4. Bypass with SideSync

You can use SideSync to share the screen and data between your computer and mobile phone. How can we use this for FRP bypass?

1. Download the SideSync from the official site and install the SideSync application on your computer.

2. Connect your phone and computer to the Google account verification screen.
3. Now plug in the first end of your OTG adapter with your phone and connect another end to the flash drive with APK.
4. Your phone will launch the file explorer automatically, showing the root directory of the flash drive.
5. Now click on the APK file.
6. Click Settings and allow to install from Unknown sources, and click OK.
7. After installation, open SideSync.
8. Disconnect the OTG cable from your Samsung phone.
9. Now access the Settings menu and go to the Backup & reset option and conduct a factory reset.

Method 5. 3 Steps to Bypass Vivo FRP Bypass

Dr.Fone - Screen Unlock (Android) is a reliable and efficient tool designed to help users bypass FRP (Factory Reset Protection) locks on Android devices, including Vivo smartphones. This powerful software provides a hassle-free solution for those locked out of their Vivo devices due to FRP lock. With its user-friendly interface and advanced features, Dr.Fone makes FRP bypassing a straightforward process, even for users with limited technical knowledge.

Dr.Fone - Screen Unlock (Android)

Remove Google Lock (FRP) from Vivo Devices

• Pattern, PIN, password, fingerprints & face screen lock can all be unlocked.
• Bypass Android FRP lock without a PIN or Google account.
• Unlock mainstream Android brands like Samsung, Vivo, Xiaomi, etc.
• No tech knowledge required, Simple, click-through, process.

3,981,454 people have downloaded it

3 Steps to Bypass Vivo FRP Lock with Dr.Fone - Screen Unlock (Android)

• Step 1. After installing Dr.Fone - Screen Unlock (Android), launch the program and select the “Screen Unlock” option from the main menu. Continue to Android > Remove Google FRP Lock.

• Step 2. Then select Vivo and click the Start button to continue. Then, connect your locked Vivo device to the computer using a USB cable. Ensure that USB debugging is enabled on your Vivo device before proceeding with the next steps.

• Step 3. Once your Vivo device is successfully connected, Dr.Fone - Screen Unlock (Android) will automatically detect it. Follow the on-screen instructions to put your Vivo device into specic mode. Once in the correct mode, Dr.Fone will start downloading the necessary firmware to bypass the FRP lock.

During the process, it’s crucial to keep your device connected to the computer and refrain from disconnecting it until the bypass is complete. After the firmware download is finished, Dr.Fone will initiate the FRP lock bypass process. Once completed, your Vivo device will restart, and you’ll regain access to it without encountering the FRP lock.

safe & secure

The Bottom Line

FRP is a great feature to add security to Android phones. However, sometimes it is necessary to bypass it to fully use your phone. When you are stuck with an FRP lock, it is a frustrating situation, especially when you want to factory reset your phone. We have described various methods so that you choose the best solution according to your requirements for the Vivo V29e FRP bypass. Among them, bypassing Vivo FRP lock is made simple and efficient with Dr.Fone - Screen Unlock (Android). Say goodbye to FRP lock frustrations and regain access to your Vivo device swiftly with Dr.Fone - Screen Unlock (Android) .

safe & secure

A Step-by-Step Guide on Using ADB and Fastboot to Remove FRP Lock on your Vivo V29e

Factory Reset Protection is one of the security measures available on Android 5.1 and later devices to prevent intruders’ unauthorized factory resetting of the Vivo V29e device. Among the several ways to fix this issue and remove the lock, one is ADB and Fastboot commands. So, if you are aware of using Android Debug Bridge, the below content will help you understand how it can be used to remove the FRP lock.

You can watch the video below to bypass FRP lock without hassle!

Part 1: Quick Overview of ADB and Fastboot Commands

1. What are ADB and Fastboot?

Standing for Android Debug Bridge, ADB and Fastboots are the methods through which communication with an Android device can be done through a computer. Under this method, the commands and the actions that are sent from the system are performed on your Android device.

Several issues can be resolved, and multiple functions can be performed using the ADB format tool and Fastboots, and this also includes removing the FRP lock on your Android device. To use this method, USB debugging should be enabled on the Vivo V29e device.

For specific brands of Android phones, specific utility tools are available like the Vivo ADB format tool and the Samsung ADB format tool, which are used explicitly for Vivo and Samsung phones, respectively.

2. How Do ADB and Fastboot Bypass FRP?

Using the versatile ADB command-line tool and Fastboots, the Google FRP lock can be removed using several commands depending on the OS version. This is a client-server program that includes a client who sends the commands, a daemon used to run the commands on the Vivo V29e device, and a server that facilitates communication between the client and the daemon.

ADB comes included in the Android SDK Platform-Tools package, and this can be downloaded using the SDK manager.

3. What Are the Android Versions that ADB and Fastboot Command Support?

The Android versions on which ADB and Fastboot commands can be used are as follows:

• _Android 5 – Lollipop_
• _Android 6- Marshmellow_
• _Android 7 – Nougat_
• _Android 8- Oreo_
• _Android 9- Pie_
• _Android 10 – Q (expected to work though not tested as yet)_

Part 2: How to Set Up ADB and Fastboot Commands to Remove FRP Lock on Android?

To remove FRP lock using ADB, you first need to install and set up ADB and then remove them using the command. The steps for the same are enlisted below.

Steps to remove FRP using ADB

• Step 1. Firstly, download the ADB installed setup file and then extract the files from the toolkit on your system in a folder.

• Step 2. Next, you need to run adb.setup.exe and then type Y for installing the drivers for ADB and Fastboot.

• Step 3. Again, enter Y for installing the drivers and when done successfully, the command window will close.

• Step 4. Next, power on your Android device and connect it to your PC using a USB cable. Here also ensure that USB debugging mode is enabled on your Android device.

• Step 5. Next, hold down the Shift key and then right-click at any place blank in the ADB folder, and then choose the Open command window here option.

• Step 6. Now to remove the FRP you need to enter the following commands at the command prompt one by one where enter needs to be clicked after every line.

• _Adb shell am start -n com.google.android.gsf.login/_

• _adb shell am start -n com.google.android.gsf.login.LoginActivity_

• _adb shell content insert –uri content://settings/secure –bind name:s:user_setup_complete –bind value:s:1_

• Step 7. The above commands are for Samsung devices. If you want to remove the FRP on other brands, enter the following commands:

• _Adb shell content insert –uri content://settings/secure –bind_

• _name:s:user_setup_complete –bind value:s:1_

After the execution of the commands, the FRP lock will be removed from your Android device.

Steps to remove FRP using Fastboot

• Step 1. Put the Android device into the bootloader or fastboot mode. (depending on the model and brand of your Android device, the process of entering into the fastboot will differ).

• Step 2. Connect your phone to your PC using a USB cable.

• Step 3. Next, depending on the system, enter the following command in the CMD window:

• _Lenovo FRP command_

• _fastboot erase config_

• _fastboot reboot_

• _XIAOMI FRP command_

• _fastboot -w_

• _MICROMAX YU YUPHORIA FRP_

• _Fastboot -i 0x2a96 erase configFastboot -i 0x2a96 reboot_

• _DEEP/HTC/Other Brands FRP_

• _fastboot erase configfastboot reboot_

Part 3: Limitations of Using ADB and Fastboot Command Method

The ADB and Fastboots command is a workable solution for removing the FRP lock on your Android device, the drawback is that the method is quite complicated and requires thorough technical know-how of ADB and its working. There are several limitations associated with this method as enlisted below.

• Requires technical know-how

To remove FRP using the ADB command you need to have a thorough knowledge of using the tool. The tool has a deep learning curve which makes this method little for the majority of the users.

• Might not unlock the phone

You can try the ADB method for removing the FRP lock but there is no guarantee that the results will be positive and your device will be unlocked.

• Issues with the drivers

Several times while using this method, you might encounter driver issues when your device is not detected as proper drivers are not installed.

• Unexpected issues and errors

ADB is a command-based method, and thus it is important that the commands are entered right. If there is a slight error in the typing of the command, it might lead to major issues and can even be the Vivo V29e device damaged.

• The process is not user-friendly

ADB is a technical process aimed toward the geeks, and thus the overall process is not user-friendly and complicated.

Part 4: The Best ADB Alternative to Bypass FRP Lock on Android Phones

Considering the several limitations of the ADB and Fastboot command method, the need for a simple, user-friendly, and workable solution for removing FRP lock on Android devices arises. One of the best software here that we recommend is Dr.Fone - Screen Unlock (Android) which helps in removing and bypassing many Android phone screen locks including the one appearing due to FRP lock.

Dr.Fone - Screen Unlock (Android)

Remove Google FRP on Samsung without PIN code or Google accounts.

• Pattern, PIN, password, fingerprints & face screen lock can all be unlocked.
• Bypass Google FRP on Samsung without pin code or Google accounts.
• No tech knowledge asked, everybody can handle it.
• Work for Samsung, Xiaomi, Redmi, OPPO, etc.

4,005,551 people have downloaded it

The process of using the software is user-friendly and thus can also be used by non-techy users.

Steps for removing FRP lock on Android using Dr.Fone Screen Unlock

• Step 1. Launch the installed software and choose the Screen Unlock option from the main interface. Choose Android and then select the Remove Google FRP Lock option.

• Step 2. Select the model brans from the options shown on the interface, and then connect your phone to your PC using a USB cable. The connected device details will appear on the interface.

• Step 3. Follow the next steps as they appear. Once the FRP lock is successfully removed, the prompt window will show its completion. Click Done if you have successfully executed the process.

The above is the brief steps for the process. You can check the bypass Samsung FRP lock guide in detail.

Conclusion

If you are well versed with the commands of ADB and Fastboots you can go ahead and use the ADB bypass FRP tool for removing the FRP lock but if this command line method seems complicated for you, Dr.Fone Screen Unlock is the best tool to use.

Best Vivo FRP Bypass Guide

Vivo devices have long proven their value in the mobile market by releasing new models with cutting-edge functionality. With the latest security update in its releases, the android operating system has made it more challenging to overcome Vivo c11 FRP bypass on handsets automatically. Due to Google’s recent Android Security updates, Vivo V29e FRP Bypass is now extremely tough. FRP is a novel security mechanism implemented in contemporary Android smartphones. To authenticate the valid owner, Android will prompt you to input the last Google account active on the phone before executing the hard reset.

So, this tutorial is for you if you’ve lost your existing Gmail account and your smartphone is stopped at the Google verification screen. This guide will show you the most recent technique for **Vivo V29e FRP Bypass-**Google Account Unlock. So attentively adhere to the simple method outlined below.

Am I able to bypass Vivo FRP?

What is FRP?

Factory Reset Protection (FRP) is a safety measure available on Android smartphones. When you establish a Google Account on your smartphone, FRP is felt most strongly. When FRP is enabled, it stops a device from being used after a factory data reset unless you log in with a Google identity.

How it works?

Factory Reset Protection is an enhanced security feature that is accessible on the bulk of Android smartphones. When you reset your Android phone, you’ll need your phone’s Login details to gain entry to it. But now, we’ll go through the free FRP tools that can bypass your Google FRP.

FRP will be triggered immediately after the Google accounts have been connected to the Android smartphone. If FRP is enabled, the Samsung smartphone cannot be used after a factory reset unless you connect using your Google login and username that you previously made on the Samsung device.

If you want to restore the factory reset on your Android phone, make sure you’re in the options, navigate to your Account Settings, head to your accounts and clouds, and remove the Gmail email account on your Android smartphone. This should activate the FRP feature on your Android device.

Requisite: Before attempting this method on your device, ensure that your cellphone has at least a 50-60% rechargeable battery to finish the upgrading process properly.

A simple list of solutions

To solve your problem, we have provided these three solutions you can have to unlock your android.

• Retrieve your Google account on another device
• Delete Google account from Settings
• Bypass Vivo FRP through PC by using a USB Cable

Solutions to Bypass Vivo FRP?

Retrieve your Google account on another device

The fundamental and most innovative way to do the Factory Reset is to recover a Google account. You can restore your Email ID or password from another device or computer before attempting FRP bypassing Vivo V29e .

You may also include an alternate email or phone number for the account you would like to restore. Google will email you a verification Vivo FRP bypass code, which you can use to create a new password for your Google account.

Once you change your password, it will require 24 to 72 hours for the reset password to synchronize with all gadgets connected to the account. After you’ve synced, you may do a factory data reset by entering your email address and a new password. You may factory reset your device by using this approach.

If you enter the incorrect password throughout this procedure, the time will be reset for the following 24-72 hours to synchronize. So, use caution while putting your email and password into the gadget. To finish the process, link your Vivo V29e to a connection and leave it on for the moment.

Delete Google account from Settings

Whenever we erase the Google account from the C11, we disable the FRP of the computer system Android 11, Realme. However, it is a prevention that ties the Vivo V29e to a Google account such that when it is restarted or prohibited due to loss or theft; it asks for the Google account login and password.

First step:

To remove your Google account, navigate to the settings icon on your Realme, which should be on the home screen or in the phone menu. You can reach the main menu by moving your fingertip from the bottom to the top of your screen.

Second step:

We browse through the C11 options and seek for the “Accounts” area, where you have to click to enable.

Third step:

All accounts associated with this Vivo V29e will be displayed, including Google accounts and other social media accounts such as Instagram, Facebook, TikTok, Twitter, etc. Choose the profile you wish to disconnect from this device.

Fourth step:

It will show the data associated with this Google account and the Vivo V29e . To proceed, click “Remove account.”

Fifth step:

To avoid accidentally disconnecting an account from the Vivo V29e , tap “Remove account” once more to verify. It will clear the Vivo V29e device of any data associated with this account.

Bypass Vivo FRP through PC by Using USB Cable

If you want to use your PC to bypass Vivo FRP, then here is another useful solution with the following steps:

Step 1:

The first step is to download and install a tool called “SideSync apk.” Once it is installed, run and connect your Vivo V29e with your PC by using a USB cable.

Step 2:

A pop-up screen will be shown asking you what Application you would like to use for opening the tool. Here you can select Chrome to open this too.

Step 3:

Your file will be downloaded through the Chrome browser. Then install ES File Explorer so that you can find and open the apk file.

Step 4:

Once the ES File Explorer is installed on your phone, find the APK file downloaded to your device, and install it. This will pop up in the settings menu, where you must choose the option of Backup and reset. Then select Factory data reset to rest your Vivo device. Here you go, you have bypassed the FRP of your device.

Conclusion

That’s it, guys. We hope this guide was helpful to you in order to bypass the Vivo V29e FRP. However, you can have the best option for the bypass as per your choice and convenience.