5 Quick Methods to Bypass Tecno Spark 20C FRP

Google Factory Reset Protection, a.k.a FRP, is developed by Google for all Android phones. It adds an extra layer of security to your phone and the data on it. It is aimed at making it difficult for the illegal holder of your phone to factory reset your phone and remove tracking information. Then why do we need to discuss the Tecno Spark 20C FRP bypass?

Though the protection is meant for you, sometimes you may forget the password and want your Tecno Spark 20C FRP removed. Also, if you bought a used phone and the previous user has set up FRP with her password, you need to bypass it.

Part 1: In what cases does the Tecno Spark 20C FRP bypass works?

How and why should I bypass Tecno Spark 20C FRP? Let us look at the valid reasons.

1. Buy a locked second-hand Tecno

When you buy a second-hand phone, ideally, the previous user must format and hard reset the Tecno phone to remove all locks and password requirements. However, if it doesn’t happen, you cannot use some options on your phone and configure security because of FRP. Here, your savior is the option of the Tecno Spark 20C FRP bypass.

2. Forget Google account ID and password

Even if you have locked your Tecno phone yourself, you are stuck when you forget your Google username and password. So, you can only recover your phone using the Tecno Spark 20C FRP bypass.

3. The person with a Tecno from his company no longer works for it

Some employees also receive official phones from their company which they have to return when they leave the company. Now, it becomes a horror story for the new employee if he gets the same phone locked with the previous user’s ID.

Part 2: 5 quick methods to bypass Tecno Spark 20C FRP

Ok, now this is established that there are certain situations when you need to conduct a Tecno Spark 20C FRP bypass. So how do you do the Tecno Spark 20C FRP bypass?

Method 1. Retrieve your Google account from another device

If your phone is locked with a Google account whose password you do not know or have forgotten, then you can use this method to Tecno Spark 20C FRP bypass. In this method, you can try to retrieve your Google account from another device. It is a simple step-by-step process tha can be completed from a PC or another mobile device.

If you have forgot the email address but remember the password, then follow these steps.

1. Navigate to Google’s Find My Email page in your browser.

When you can’t remember the email address that was configured, go to the Find My Email page and start account recovery process.

2. Enter your recovery email or phone number

On the next screen, provide a recovery email or phone number and click Next.

3. Provide your first and last name

Enter your first and last name in the given form and click Next.

4. Verification code

Google will send a verification code to the setup recovery email or phone number, click Send.

5. Verification code entry

Check your email inbox or phone messages depending on the recovery method and find the verification code. Enter it in the given form. If it is correct, you can go to the next final step.

6. Choose an account

From the list of accounts showing on the screen, select the account you want to recover.

7. Enter your password

Enter the password in the text box and you are done.

If you remember the email but not the password, then the Tecno Spark 20C FRP bypass method will go like this.

1. Google’s Account Recovery page

Navigate to the Account Recovery page from the browser on your PC or other mobile devices.

2. Enter your email address

Fill in the form with your Google account and click Next.

3. Enter the last password you remember

The next form will ask you to enter the last password you remember and that worked

Now, you will receive a message to your registered device, to verify it’s you. Open it and click , Yes, it is me.

Now, wait for six hours for Google to verify it’s you and then they will send a password reset link to your email.

Now, what if you can’t remember your last password, then use the next method.

4. Click on “Try another way”

Now Google will send a message to your phone to verify it’s you. On your phone, open the message and click Yes, it’s me.

After verification, Google will send you a password reset link after six hours.

If your phone is not registered in your Google account then, try the next method.

5. Click on “Try another way” again

If your phone is enabled to check for the code, click Try another way again.

Google will then ask you to send a verification code to your registered phone number. Click Send.

Find the code from your messages, enter it, and click Next.

Now again, you will wait for six hours till Google sends the password reset link to your email.

Method 2. Use FRP Bypass APK

FRP bypass APK is another tool you can use to Tecno Spark 20C FRP bypass easily. Let us see how it works step by step.

• Download FRP Bypass APK for Tecno Spark 20C FRP bypass android 11.
• Once it’s downloaded, open the File Manager using the Open Files app
• Find the suitable Apk and click on it
• Install & open the APK.
• Open the browser on your phone.
• Launch any of these two below URL.
  • https://tiny.cc/frptools
  • https://bit.ly/2NKxXYs
• Go to the FRP bypass APK >FRP APPS section
• Open Settings leading to the Tecno Spark 20C device Settings>System Settings> Backup & Reset >Reset Phone
• Now click on Reset System Settings Only, and confirm Reset System Settings Only.
• Select Erase All data and confirm.
• Your device will be rebooted.
• Wait till the factory reset process completes.

Now, reboot your device and set it up according to your requirements.

Method 3. Deactivate FRP

Another way to come around Tecno Spark 20C FRP bypass is to deactivate FRP. Let us follow the step-by-step process.

1. Launch the “Settings” app and scroll to the Apps.
2. Click on the “Manage apps” (applications) and then the “All” tab.
3. Open “Google App.”
4. Click on the “Clear cache” to remove the Google account cache.

5. Also, clear all data to erase data stored.
6. Click the “Back” button, and go to “Gmail.”
7. Click on the “Clear cache” and “Clear data.”

8. In the Tecno Spark 20C device Settings menu and click “Data synchronization.” When your device asks you to enter your Google account, enter your new Gmail account.

You have successfully completed the Tecno Spark 20C FRP bypass process.

Method 4. Bypass with SideSync

You can use SideSync to share the screen and data between your computer and mobile phone. How can we use this for FRP bypass?

1. Download the SideSync from the official site and install the SideSync application on your computer.

2. Connect your phone and computer to the Google account verification screen.
3. Now plug in the first end of your OTG adapter with your phone and connect another end to the flash drive with APK.
4. Your phone will launch the file explorer automatically, showing the root directory of the flash drive.
5. Now click on the APK file.
6. Click Settings and allow to install from Unknown sources, and click OK.
7. After installation, open SideSync.
8. Disconnect the OTG cable from your Samsung phone.
9. Now access the Settings menu and go to the Backup & reset option and conduct a factory reset.

Method 5. 3 Steps to Bypass Tecno FRP Bypass

Dr.Fone - Screen Unlock (Android) is a reliable and efficient tool designed to help users bypass FRP (Factory Reset Protection) locks on Android devices, including Tecno smartphones. This powerful software provides a hassle-free solution for those locked out of their Tecno devices due to FRP lock. With its user-friendly interface and advanced features, Dr.Fone makes FRP bypassing a straightforward process, even for users with limited technical knowledge.

Dr.Fone - Screen Unlock (Android)

Remove Google Lock (FRP) from Tecno Devices

• Pattern, PIN, password, fingerprints & face screen lock can all be unlocked.
• Bypass Android FRP lock without a PIN or Google account.
• Unlock mainstream Android brands like Samsung, Tecno, Xiaomi, etc.
• No tech knowledge required, Simple, click-through, process.

3,981,454 people have downloaded it

3 Steps to Bypass Tecno FRP Lock with Dr.Fone - Screen Unlock (Android)

• Step 1. After installing Dr.Fone - Screen Unlock (Android), launch the program and select the “Screen Unlock” option from the main menu. Continue to Android > Remove Google FRP Lock.

• Step 2. Then select Tecno and click the Start button to continue. Then, connect your locked Tecno device to the computer using a USB cable. Ensure that USB debugging is enabled on your Tecno device before proceeding with the next steps.

• Step 3. Once your Tecno device is successfully connected, Dr.Fone - Screen Unlock (Android) will automatically detect it. Follow the on-screen instructions to put your Tecno device into specic mode. Once in the correct mode, Dr.Fone will start downloading the necessary firmware to bypass the FRP lock.

During the process, it’s crucial to keep your device connected to the computer and refrain from disconnecting it until the bypass is complete. After the firmware download is finished, Dr.Fone will initiate the FRP lock bypass process. Once completed, your Tecno device will restart, and you’ll regain access to it without encountering the FRP lock.

safe & secure

The Bottom Line

FRP is a great feature to add security to Android phones. However, sometimes it is necessary to bypass it to fully use your phone. When you are stuck with an FRP lock, it is a frustrating situation, especially when you want to factory reset your phone. We have described various methods so that you choose the best solution according to your requirements for the Tecno Spark 20C FRP bypass. Among them, bypassing Tecno FRP lock is made simple and efficient with Dr.Fone - Screen Unlock (Android). Say goodbye to FRP lock frustrations and regain access to your Tecno device swiftly with Dr.Fone - Screen Unlock (Android) .

safe & secure

A Step-by-Step Guide on Using ADB and Fastboot to Remove FRP Lock on your Tecno Spark 20C

Factory Reset Protection is one of the security measures available on Android 5.1 and later devices to prevent intruders’ unauthorized factory resetting of the Tecno Spark 20C device. Among the several ways to fix this issue and remove the lock, one is ADB and Fastboot commands. So, if you are aware of using Android Debug Bridge, the below content will help you understand how it can be used to remove the FRP lock.

You can watch the video below to bypass FRP lock without hassle!

Part 1: Quick Overview of ADB and Fastboot Commands

1. What are ADB and Fastboot?

Standing for Android Debug Bridge, ADB and Fastboots are the methods through which communication with an Android device can be done through a computer. Under this method, the commands and the actions that are sent from the system are performed on your Android device.

Several issues can be resolved, and multiple functions can be performed using the ADB format tool and Fastboots, and this also includes removing the FRP lock on your Android device. To use this method, USB debugging should be enabled on the Tecno Spark 20C device.

For specific brands of Android phones, specific utility tools are available like the Vivo ADB format tool and the Samsung ADB format tool, which are used explicitly for Vivo and Samsung phones, respectively.

2. How Do ADB and Fastboot Bypass FRP?

Using the versatile ADB command-line tool and Fastboots, the Google FRP lock can be removed using several commands depending on the OS version. This is a client-server program that includes a client who sends the commands, a daemon used to run the commands on the Tecno Spark 20C device, and a server that facilitates communication between the client and the daemon.

ADB comes included in the Android SDK Platform-Tools package, and this can be downloaded using the SDK manager.

3. What Are the Android Versions that ADB and Fastboot Command Support?

The Android versions on which ADB and Fastboot commands can be used are as follows:

• _Android 5 – Lollipop_
• _Android 6- Marshmellow_
• _Android 7 – Nougat_
• _Android 8- Oreo_
• _Android 9- Pie_
• _Android 10 – Q (expected to work though not tested as yet)_

Part 2: How to Set Up ADB and Fastboot Commands to Remove FRP Lock on Android?

To remove FRP lock using ADB, you first need to install and set up ADB and then remove them using the command. The steps for the same are enlisted below.

Steps to remove FRP using ADB

• Step 1. Firstly, download the ADB installed setup file and then extract the files from the toolkit on your system in a folder.

• Step 2. Next, you need to run adb.setup.exe and then type Y for installing the drivers for ADB and Fastboot.

• Step 3. Again, enter Y for installing the drivers and when done successfully, the command window will close.

• Step 4. Next, power on your Android device and connect it to your PC using a USB cable. Here also ensure that USB debugging mode is enabled on your Android device.

• Step 5. Next, hold down the Shift key and then right-click at any place blank in the ADB folder, and then choose the Open command window here option.

• Step 6. Now to remove the FRP you need to enter the following commands at the command prompt one by one where enter needs to be clicked after every line.

• _Adb shell am start -n com.google.android.gsf.login/_

• _adb shell am start -n com.google.android.gsf.login.LoginActivity_

• _adb shell content insert –uri content://settings/secure –bind name:s:user_setup_complete –bind value:s:1_

• Step 7. The above commands are for Samsung devices. If you want to remove the FRP on other brands, enter the following commands:

• _Adb shell content insert –uri content://settings/secure –bind_

• _name:s:user_setup_complete –bind value:s:1_

After the execution of the commands, the FRP lock will be removed from your Android device.

Steps to remove FRP using Fastboot

• Step 1. Put the Android device into the bootloader or fastboot mode. (depending on the model and brand of your Android device, the process of entering into the fastboot will differ).

• Step 2. Connect your phone to your PC using a USB cable.

• Step 3. Next, depending on the system, enter the following command in the CMD window:

• _Lenovo FRP command_

• _fastboot erase config_

• _fastboot reboot_

• _XIAOMI FRP command_

• _fastboot -w_

• _MICROMAX YU YUPHORIA FRP_

• _Fastboot -i 0x2a96 erase configFastboot -i 0x2a96 reboot_

• _DEEP/HTC/Other Brands FRP_

• _fastboot erase configfastboot reboot_

Part 3: Limitations of Using ADB and Fastboot Command Method

The ADB and Fastboots command is a workable solution for removing the FRP lock on your Android device, the drawback is that the method is quite complicated and requires thorough technical know-how of ADB and its working. There are several limitations associated with this method as enlisted below.

• Requires technical know-how

To remove FRP using the ADB command you need to have a thorough knowledge of using the tool. The tool has a deep learning curve which makes this method little for the majority of the users.

• Might not unlock the phone

You can try the ADB method for removing the FRP lock but there is no guarantee that the results will be positive and your device will be unlocked.

• Issues with the drivers

Several times while using this method, you might encounter driver issues when your device is not detected as proper drivers are not installed.

• Unexpected issues and errors

ADB is a command-based method, and thus it is important that the commands are entered right. If there is a slight error in the typing of the command, it might lead to major issues and can even be the Tecno Spark 20C device damaged.

• The process is not user-friendly

ADB is a technical process aimed toward the geeks, and thus the overall process is not user-friendly and complicated.

Part 4: The Best ADB Alternative to Bypass FRP Lock on Android Phones

Considering the several limitations of the ADB and Fastboot command method, the need for a simple, user-friendly, and workable solution for removing FRP lock on Android devices arises. One of the best software here that we recommend is Dr.Fone - Screen Unlock (Android) which helps in removing and bypassing many Android phone screen locks including the one appearing due to FRP lock.

Dr.Fone - Screen Unlock (Android)

Remove Google FRP on Samsung without PIN code or Google accounts.

• Pattern, PIN, password, fingerprints & face screen lock can all be unlocked.
• Bypass Google FRP on Samsung without pin code or Google accounts.
• No tech knowledge asked, everybody can handle it.
• Work for Samsung, Xiaomi, Redmi, OPPO, etc.

4,005,551 people have downloaded it

The process of using the software is user-friendly and thus can also be used by non-techy users.

Steps for removing FRP lock on Android using Dr.Fone Screen Unlock

• Step 1. Launch the installed software and choose the Screen Unlock option from the main interface. Choose Android and then select the Remove Google FRP Lock option.

• Step 2. Select the model brans from the options shown on the interface, and then connect your phone to your PC using a USB cable. The connected device details will appear on the interface.

• Step 3. Follow the next steps as they appear. Once the FRP lock is successfully removed, the prompt window will show its completion. Click Done if you have successfully executed the process.

The above is the brief steps for the process. You can check the bypass Samsung FRP lock guide in detail.

Conclusion

If you are well versed with the commands of ADB and Fastboots you can go ahead and use the ADB bypass FRP tool for removing the FRP lock but if this command line method seems complicated for you, Dr.Fone Screen Unlock is the best tool to use.

How Can We Bypass Tecno Spark 20C FRP?

After you hard reset your Tecno smartphone, you must open the FRP lock before using it. If you can’t pass the FRP lock, Google will block your device for privacy and security. You can easily pass the Tecno FRP lock with your Google account and password. You will get stuck there if you don’t know your account and password. Although it seems like a big problem, there is no need to panic because you can bypass it using other methods.

One of the fastest ways to remove the FRP lock is to use the Tecno FRP code. If you don’t want to use this method, you can also use the talkback method to bypass FRP. Both of these methods work perfectly every time, so the choice is up to you. Here, we will give you an easy guide to bypass FRP on your Tecno .

Part 1: What is Tecno FRP Bypass Code?

Factory reset protection is a Google security feature that protects your phone from unauthorized access. The FRP activates when you log in with a Google account on your smartphone. When you reset your device, the FRP asks for Google verification. The FRP lock doesn’t allow device access without your Google account and password. You can enter the Tecno FRP bypass code to open the FRP lock on your device without your Google account and password.

Even for smartphones from the same brand, the method to bypass FRP varies for each model. Instead of using complex methods to bypass FRP on your device, you can use the bypass code to remove the lock in seconds. The English Tecno FRP code is *#813#, and the Chinese code is *#812#. You can learn how to use these codes from our step-by-step guide.

Part 2: Efficient Ways to Bypass Tecno FRP

In this part, we will explore three efficient methods to bypass Tecno FRP and weigh the advantages and disadvantages of each.

A Comprehensive Comparison of Three Methods to Bypass Tecno FRP

Method	Advantages	Disadvantages
Wondershare Dr.Fone [Fast & Easy]	1. Efficiency: Wondershare Dr.Fone offers a fast and efficient FRP bypass process, ensuring quick access to your Tecno device.
2. User-Friendly: The software comes with an intuitive interface, making it accessible to both novice and experienced users.
3. Comprehensive Solution: Beyond FRP bypass, Wondershare Dr.Fone provides additional features for data recovery and device optimization.	Cost: While the software may require a purchase, the cost is justified by its effectiveness and additional functionalities.
Tecno Emergency FRP Code	1. Official Solution: This method is officially supported by Tecno , ensuring compatibility and reliability.
2. No Additional Software: The Emergency FRP Code doesn’t require third-party software installations, simplifying the process.	1. Limited Accessibility: Obtaining the Emergency FRP Code may involve contacting Tecno support, leading to potential delays.
2. Complexity: The process might be more complex for users unfamiliar with official support channels.
Talkback Method to Bypass	No External Software: This method doesn’t require additional software installations, making it a straightforward option.	1. Technical Skill Required: The Talkback Method involves navigating through device settings, which might be challenging for users without technical expertise.
2. Time-Consuming: Compared to software solutions, this method may take longer to complete.

1: Recommended: Use a powerful software-Wondershare Dr.Fone [Fast & Easy]

Facing the FRP (Factory Reset Protection) lock on your Tecno phone can be a roadblock, but with the right tools, the process becomes seamless. In this step-by-step guide, we’ll walk you through the easy and effective steps to bypass the FRP lock on your Tecno phone using the reliable Dr.Fone - Screen Unlock (Android) .

Dr.Fone - Screen Unlock (Android)

The Best FRP Lock Removal Tool for Tecno

• Pattern, PIN, password, fingerprints & face screen lock can all be unlocked.
• Bypass Android FRP lock without a PIN or Google account.
• Unlock mainstream Android brands like Samsung, Tecno , Xiaomi, etc.
• No tech knowledge required, Simple, click-through, process.

4,008,671 people have downloaded it

Step-by-Step Guide to bypassing Tecno Frp Lock

Follow these straightforward steps to bypass the FRP lock on your Tecno phone using Dr.Fone:

• Step 1. Launch Wondershare Dr.Fone and select Toolbox > Screen Unlock.
• Step 2. Choose Android and then click Remove Google FRP Lock button on the next page.

• Step 3. Then you will see various device brands and select OPPO among the options.

• Step 4. Once you have selected the Tecno Spark 20C device brand, Dr.Fone will initiate the downloading process of FRP.

• Step 5. When it finished downloading, please turn off your device and connect it to the computer. Press the Volume Up and Down buttons for about 3 seconds during the connecting process.

• Step 6. Wait for a few minutes until the FRP is unlocked.

Wondershare Dr.Fone is a reliable software to bypass Tecno FRP with a high success rate. Its easy-to-use feature makes it popular among users. We recommend it as your first choice.

safe & secure

2: Use Tecno Emergency FRP Code

The Tecno Emergency FRP Code is an alternative method to bypass FRP, relying on a unique code provided by the Tecno Spark 20C device manufacturer. After you do a factory reset on your Tecno smartphone, don’t rush to set it up. If you set up your device, the FRP lock will appear on the screen. When you go to the language selection screen, tap on the emergency call option to open the dialer. That’s where you will be entering the Tecno FRP bypass code. Follow these steps to remove the FRP lock from your smartphone.

• Step 1. Power on your Tecno device after the factory reset.
• Step 2. Start the Tecno Spark 20C device set up and connect it to a Wi-Fi network.
• Step 3. After you enable the Wi-Fi connection, return to the welcome screen.
• Step 4. Tap on the “Emergency Call” option at the bottom left of the language selection page.
• Step 5. Type one of the FRP bypass codes (*#813# or *#812#) on the dialer and tap on the “Dial” button.
• Step 6. Next, don’t do anything and wait for the home screen of your Tecno device to appear. You might see some alerts, but you don’t have to touch the screen.
• Step 7. Once you enter your phone, open “Settings” and go to “About phone”.
• Step 8. Enable Developer options by tapping on the android version between seven to ten times.
• Step 9. From the Developer Options, enable USB debugging.
• Step 10. Now, go back to “Settings” and reset your Tecno device from the “Factory Data Reset” option.
• Step 11. Once the reset is complete, you can set up your device and enter it without FRP.

3: By Talkback Method to Bypass

For those seeking a manual approach, the Talkback Method involves leveraging the accessibility feature on the Tecno Spark 20C device. Before using the Talkback method, ensure that your phone has more than 50% battery backup and an internet connection. The Talkback method will not work on devices with the latest Android operating system. Here are the steps to bypass Tecno FRP lock with the Talkback method.

• Step 1. Power on your Tecno smartphone and hold the volume up + down buttons at the same time to enable the Talkback feature.
• Step 2. Select “Turn on” to open the Talkback shortcut. Once you enable this feature, you can long press the volume up + down buttons to enable it anytime.
• Step 3. Now, double tap on the close button on the screen twice.
• Step 4. Next, draw the letter “L” on the hello screen and double-tap on the “Talkback Settings”.
• Step 5. In the menu, swipe down with two fingers to navigate to the “Braille Keyboard”. Double-tap to select it and go to “keyboard settings”.
• Step 6. Now, open the “Talkback Braille Keyboard” and return to the add network screen. Also, turn off the Talkback feature by long pressing the volume down + up buttons together.
• Step 7. Click on the keyboard icon to open the “Talkback Braille Keyboard” again. Enable accessibility settings and swipe right to enter the “General” option.
• Step 8. Navigate to “Help & Feedback” from the accessibility menu.
• Step 9. Tap on the “Control Your Tecno Spark 20C Device with Switch Access” and tap on the “Play” icon. Next, tap on the three dots in the video corner.
• Step 10. elect the “Share” option and tap on the three dots next to the Twitter icon this time.
• Step 11. Go to “Settings” from the “Profile” icon and select “YouTube Terms and Services” from “History & Privacy”.
• Step 12. Next, tap on the “Accept and Continue” option. Select “Next” and tap on “No Thanks” on the next page.

Which Method is Best to Bypass Tecno FRP Lock?

Choosing the right method to bypass Tecno FRP depends on your preferences, technical proficiency, and urgency. Wondershare Dr.Fone - Screen Unlock (Android) offers a swift and user-friendly solution, the Tecno Emergency FRP Code provides an official route, while the Talkback Method caters to those who prefer a manual approach. Consider the advantages and disadvantages outlined above to make an informed decision and regain access to your Tecno device efficiently.

safe & secure

Part 3: FAQ for Bypassing Tecno FRP (Factory Reset Protection)

Below you’ll find answers to some of the most common questions regarding bypassing Factory Reset Protection (FRP) on Tecno devices.

1. What is the FRP skip code for Tecno ?

Currently, there is no universally applicable “FRP skip code” for Tecno devices. FRP is a security feature, designed to prevent unauthorized access to your device after a factory reset. If you are the legitimate owner and need to bypass FRP, you may need to contact Tecno customer support or follow authorized methods for FRP bypass, which usually involve verifying your Google account credentials.

2. What is the emergency code for FRP bypass?

There is no official emergency code for bypassing FRP on Tecno or other Android devices. FRP is a critical security feature implemented by device manufacturers to protect users’ data. To bypass FRP, you must follow the legitimate procedure provided by Tecno or seek professional assistance.

3. How to remove screen lock in Tecno mobile?

Unlocking your Tecno mobile’s screen with Dr.Fone - Screen Unlock (Android) is a seamless solution. Unlike hard resetting, which often leads to FRP lock issues, Dr.Fone provides a faster and safer alternative. This Tecno Unlock Tool swiftly bypasses the lock screen without requiring a password, ensuring a secure and efficient process.

safe & secure

4. How to remove an admin in Tecno ?

To remove an admin, or a device administrator:

• Step 1. Go to ‘Settings’ on your Tecno device.
• Step 2. Scroll down and tap on ‘Security’.
• Step 3. Then, select ‘Device Administrators’ or ‘Device Admin Apps’.
• Step 4. You will see a list of apps with administrator privileges. Find the admin you want to remove and toggle off its access.
• Step 5. Confirm by tapping ‘Deactivate’ when prompted.

5. How to disable Tecno security?

Disabling security features like passwords, PINs, pattern locks, or biometric scans can be done through settings:

• Step 1. Open ‘Settings’ and go to ‘Security’.
• Step 2. Tap on ‘Passcode’, ‘Biometrics & Passcode’, or a similar option depending on your device model.
• Step 3. Choose the lock method currently in use and select ‘None’ or ‘Disable’.

Note: Disabling security features makes your device more vulnerable to unauthorized access.

Conclusion

Let’s conclude our guide on how to bypass the Tecno FRP lock. You can remove the FRP lock from your Tecno device with various methods. The fastest and easiest way is to use the Tecno FRP code, which lets you bypass the FRP lock within seconds. You can also use the Talkback method if you have an older Tecno device. In addition to the FRP lock, you can bypass the screen lock on any Tecno device with Dr.Fone - Screen Unlock (Android) . Dr.Fone enables users to unlock any android device without a password. It is a one-stop solution with features like WhatsApp transfer, data backup and restore, data eraser, and system repair.