5 Quick Methods to Bypass Tecno Spark 20 Pro+ FRP

Google Factory Reset Protection, a.k.a FRP, is developed by Google for all Android phones. It adds an extra layer of security to your phone and the data on it. It is aimed at making it difficult for the illegal holder of your phone to factory reset your phone and remove tracking information. Then why do we need to discuss the Tecno Spark 20 Pro+ FRP bypass?

Though the protection is meant for you, sometimes you may forget the password and want your Tecno Spark 20 Pro+ FRP removed. Also, if you bought a used phone and the previous user has set up FRP with her password, you need to bypass it.

Part 1: In what cases does the Tecno Spark 20 Pro+ FRP bypass works?

How and why should I bypass Tecno Spark 20 Pro+ FRP? Let us look at the valid reasons.

1. Buy a locked second-hand Tecno

When you buy a second-hand phone, ideally, the previous user must format and hard reset the Tecno phone to remove all locks and password requirements. However, if it doesn’t happen, you cannot use some options on your phone and configure security because of FRP. Here, your savior is the option of the Tecno Spark 20 Pro+ FRP bypass.

2. Forget Google account ID and password

Even if you have locked your Tecno phone yourself, you are stuck when you forget your Google username and password. So, you can only recover your phone using the Tecno Spark 20 Pro+ FRP bypass.

3. The person with a Tecno from his company no longer works for it

Some employees also receive official phones from their company which they have to return when they leave the company. Now, it becomes a horror story for the new employee if he gets the same phone locked with the previous user’s ID.

Part 2: 5 quick methods to bypass Tecno Spark 20 Pro+ FRP

Ok, now this is established that there are certain situations when you need to conduct a Tecno Spark 20 Pro+ FRP bypass. So how do you do the Tecno Spark 20 Pro+ FRP bypass?

Method 1. Retrieve your Google account from another device

If your phone is locked with a Google account whose password you do not know or have forgotten, then you can use this method to Tecno Spark 20 Pro+ FRP bypass. In this method, you can try to retrieve your Google account from another device. It is a simple step-by-step process tha can be completed from a PC or another mobile device.

If you have forgot the email address but remember the password, then follow these steps.

1. Navigate to Google’s Find My Email page in your browser.

When you can’t remember the email address that was configured, go to the Find My Email page and start account recovery process.

2. Enter your recovery email or phone number

On the next screen, provide a recovery email or phone number and click Next.

3. Provide your first and last name

Enter your first and last name in the given form and click Next.

4. Verification code

Google will send a verification code to the setup recovery email or phone number, click Send.

5. Verification code entry

Check your email inbox or phone messages depending on the recovery method and find the verification code. Enter it in the given form. If it is correct, you can go to the next final step.

6. Choose an account

From the list of accounts showing on the screen, select the account you want to recover.

7. Enter your password

Enter the password in the text box and you are done.

If you remember the email but not the password, then the Tecno Spark 20 Pro+ FRP bypass method will go like this.

1. Google’s Account Recovery page

Navigate to the Account Recovery page from the browser on your PC or other mobile devices.

2. Enter your email address

Fill in the form with your Google account and click Next.

3. Enter the last password you remember

The next form will ask you to enter the last password you remember and that worked

Now, you will receive a message to your registered device, to verify it’s you. Open it and click , Yes, it is me.

Now, wait for six hours for Google to verify it’s you and then they will send a password reset link to your email.

Now, what if you can’t remember your last password, then use the next method.

4. Click on “Try another way”

Now Google will send a message to your phone to verify it’s you. On your phone, open the message and click Yes, it’s me.

After verification, Google will send you a password reset link after six hours.

If your phone is not registered in your Google account then, try the next method.

5. Click on “Try another way” again

If your phone is enabled to check for the code, click Try another way again.

Google will then ask you to send a verification code to your registered phone number. Click Send.

Find the code from your messages, enter it, and click Next.

Now again, you will wait for six hours till Google sends the password reset link to your email.

Method 2. Use FRP Bypass APK

FRP bypass APK is another tool you can use to Tecno Spark 20 Pro+ FRP bypass easily. Let us see how it works step by step.

• Download FRP Bypass APK for Tecno Spark 20 Pro+ FRP bypass android 11.
• Once it’s downloaded, open the File Manager using the Open Files app
• Find the suitable Apk and click on it
• Install & open the APK.
• Open the browser on your phone.
• Launch any of these two below URL.
  • https://tiny.cc/frptools
  • https://bit.ly/2NKxXYs
• Go to the FRP bypass APK >FRP APPS section
• Open Settings leading to the Tecno Spark 20 Pro+ device Settings>System Settings> Backup & Reset >Reset Phone
• Now click on Reset System Settings Only, and confirm Reset System Settings Only.
• Select Erase All data and confirm.
• Your device will be rebooted.
• Wait till the factory reset process completes.

Now, reboot your device and set it up according to your requirements.

Method 3. Deactivate FRP

Another way to come around Tecno Spark 20 Pro+ FRP bypass is to deactivate FRP. Let us follow the step-by-step process.

1. Launch the “Settings” app and scroll to the Apps.
2. Click on the “Manage apps” (applications) and then the “All” tab.
3. Open “Google App.”
4. Click on the “Clear cache” to remove the Google account cache.

5. Also, clear all data to erase data stored.
6. Click the “Back” button, and go to “Gmail.”
7. Click on the “Clear cache” and “Clear data.”

8. In the Tecno Spark 20 Pro+ device Settings menu and click “Data synchronization.” When your device asks you to enter your Google account, enter your new Gmail account.

You have successfully completed the Tecno Spark 20 Pro+ FRP bypass process.

Method 4. Bypass with SideSync

You can use SideSync to share the screen and data between your computer and mobile phone. How can we use this for FRP bypass?

1. Download the SideSync from the official site and install the SideSync application on your computer.

2. Connect your phone and computer to the Google account verification screen.
3. Now plug in the first end of your OTG adapter with your phone and connect another end to the flash drive with APK.
4. Your phone will launch the file explorer automatically, showing the root directory of the flash drive.
5. Now click on the APK file.
6. Click Settings and allow to install from Unknown sources, and click OK.
7. After installation, open SideSync.
8. Disconnect the OTG cable from your Samsung phone.
9. Now access the Settings menu and go to the Backup & reset option and conduct a factory reset.

Method 5. 3 Steps to Bypass Tecno FRP Bypass

Dr.Fone - Screen Unlock (Android) is a reliable and efficient tool designed to help users bypass FRP (Factory Reset Protection) locks on Android devices, including Tecno smartphones. This powerful software provides a hassle-free solution for those locked out of their Tecno devices due to FRP lock. With its user-friendly interface and advanced features, Dr.Fone makes FRP bypassing a straightforward process, even for users with limited technical knowledge.

Dr.Fone - Screen Unlock (Android)

Remove Google Lock (FRP) from Tecno Devices

• Pattern, PIN, password, fingerprints & face screen lock can all be unlocked.
• Bypass Android FRP lock without a PIN or Google account.
• Unlock mainstream Android brands like Samsung, Tecno, Xiaomi, etc.
• No tech knowledge required, Simple, click-through, process.

3,981,454 people have downloaded it

3 Steps to Bypass Tecno FRP Lock with Dr.Fone - Screen Unlock (Android)

• Step 1. After installing Dr.Fone - Screen Unlock (Android), launch the program and select the “Screen Unlock” option from the main menu. Continue to Android > Remove Google FRP Lock.

• Step 2. Then select Tecno and click the Start button to continue. Then, connect your locked Tecno device to the computer using a USB cable. Ensure that USB debugging is enabled on your Tecno device before proceeding with the next steps.

• Step 3. Once your Tecno device is successfully connected, Dr.Fone - Screen Unlock (Android) will automatically detect it. Follow the on-screen instructions to put your Tecno device into specic mode. Once in the correct mode, Dr.Fone will start downloading the necessary firmware to bypass the FRP lock.

During the process, it’s crucial to keep your device connected to the computer and refrain from disconnecting it until the bypass is complete. After the firmware download is finished, Dr.Fone will initiate the FRP lock bypass process. Once completed, your Tecno device will restart, and you’ll regain access to it without encountering the FRP lock.

safe & secure

Click here

## The Bottom Line

FRP is a great feature to add security to Android phones. However, sometimes it is necessary to bypass it to fully use your phone. When you are stuck with an FRP lock, it is a frustrating situation, especially when you want to factory reset your phone. We have described various methods so that you choose the best solution according to your requirements for the Tecno Spark 20 Pro+ FRP bypass. Among them, bypassing Tecno FRP lock is made simple and efficient with Dr.Fone - Screen Unlock (Android). Say goodbye to FRP lock frustrations and regain access to your Tecno device swiftly with Dr.Fone - Screen Unlock (Android) .

safe & secure

A Step-by-Step Guide on Using ADB and Fastboot to Remove FRP Lock on your Tecno Spark 20 Pro+

Factory Reset Protection is one of the security measures available on Android 5.1 and later devices to prevent intruders’ unauthorized factory resetting of the Tecno Spark 20 Pro+ device. Among the several ways to fix this issue and remove the lock, one is ADB and Fastboot commands. So, if you are aware of using Android Debug Bridge, the below content will help you understand how it can be used to remove the FRP lock.

You can watch the video below to bypass FRP lock without hassle!

Part 1: Quick Overview of ADB and Fastboot Commands

1. What are ADB and Fastboot?

Standing for Android Debug Bridge, ADB and Fastboots are the methods through which communication with an Android device can be done through a computer. Under this method, the commands and the actions that are sent from the system are performed on your Android device.

Several issues can be resolved, and multiple functions can be performed using the ADB format tool and Fastboots, and this also includes removing the FRP lock on your Android device. To use this method, USB debugging should be enabled on the Tecno Spark 20 Pro+ device.

For specific brands of Android phones, specific utility tools are available like the Vivo ADB format tool and the Samsung ADB format tool, which are used explicitly for Vivo and Samsung phones, respectively.

2. How Do ADB and Fastboot Bypass FRP?

Using the versatile ADB command-line tool and Fastboots, the Google FRP lock can be removed using several commands depending on the OS version. This is a client-server program that includes a client who sends the commands, a daemon used to run the commands on the Tecno Spark 20 Pro+ device, and a server that facilitates communication between the client and the daemon.

ADB comes included in the Android SDK Platform-Tools package, and this can be downloaded using the SDK manager.

3. What Are the Android Versions that ADB and Fastboot Command Support?

The Android versions on which ADB and Fastboot commands can be used are as follows:

• _Android 5 – Lollipop_
• _Android 6- Marshmellow_
• _Android 7 – Nougat_
• _Android 8- Oreo_
• _Android 9- Pie_
• _Android 10 – Q (expected to work though not tested as yet)_

Part 2: How to Set Up ADB and Fastboot Commands to Remove FRP Lock on Android?

To remove FRP lock using ADB, you first need to install and set up ADB and then remove them using the command. The steps for the same are enlisted below.

Steps to remove FRP using ADB

• Step 1. Firstly, download the ADB installed setup file and then extract the files from the toolkit on your system in a folder.

• Step 2. Next, you need to run adb.setup.exe and then type Y for installing the drivers for ADB and Fastboot.

• Step 3. Again, enter Y for installing the drivers and when done successfully, the command window will close.

• Step 4. Next, power on your Android device and connect it to your PC using a USB cable. Here also ensure that USB debugging mode is enabled on your Android device.

• Step 5. Next, hold down the Shift key and then right-click at any place blank in the ADB folder, and then choose the Open command window here option.

• Step 6. Now to remove the FRP you need to enter the following commands at the command prompt one by one where enter needs to be clicked after every line.

• _Adb shell am start -n com.google.android.gsf.login/_

• _adb shell am start -n com.google.android.gsf.login.LoginActivity_

• _adb shell content insert –uri content://settings/secure –bind name:s:user_setup_complete –bind value:s:1_

• Step 7. The above commands are for Samsung devices. If you want to remove the FRP on other brands, enter the following commands:

• _Adb shell content insert –uri content://settings/secure –bind_

• _name:s:user_setup_complete –bind value:s:1_

After the execution of the commands, the FRP lock will be removed from your Android device.

Steps to remove FRP using Fastboot

• Step 1. Put the Android device into the bootloader or fastboot mode. (depending on the model and brand of your Android device, the process of entering into the fastboot will differ).

• Step 2. Connect your phone to your PC using a USB cable.

• Step 3. Next, depending on the system, enter the following command in the CMD window:

• _Lenovo FRP command_

• _fastboot erase config_

• _fastboot reboot_

• _XIAOMI FRP command_

• _fastboot -w_

• _MICROMAX YU YUPHORIA FRP_

• _Fastboot -i 0x2a96 erase configFastboot -i 0x2a96 reboot_

• _DEEP/HTC/Other Brands FRP_

• _fastboot erase configfastboot reboot_

Part 3: Limitations of Using ADB and Fastboot Command Method

The ADB and Fastboots command is a workable solution for removing the FRP lock on your Android device, the drawback is that the method is quite complicated and requires thorough technical know-how of ADB and its working. There are several limitations associated with this method as enlisted below.

• Requires technical know-how

To remove FRP using the ADB command you need to have a thorough knowledge of using the tool. The tool has a deep learning curve which makes this method little for the majority of the users.

• Might not unlock the phone

You can try the ADB method for removing the FRP lock but there is no guarantee that the results will be positive and your device will be unlocked.

• Issues with the drivers

Several times while using this method, you might encounter driver issues when your device is not detected as proper drivers are not installed.

• Unexpected issues and errors

ADB is a command-based method, and thus it is important that the commands are entered right. If there is a slight error in the typing of the command, it might lead to major issues and can even be the Tecno Spark 20 Pro+ device damaged.

• The process is not user-friendly

ADB is a technical process aimed toward the geeks, and thus the overall process is not user-friendly and complicated.

Part 4: The Best ADB Alternative to Bypass FRP Lock on Android Phones

Considering the several limitations of the ADB and Fastboot command method, the need for a simple, user-friendly, and workable solution for removing FRP lock on Android devices arises. One of the best software here that we recommend is Dr.Fone - Screen Unlock (Android) which helps in removing and bypassing many Android phone screen locks including the one appearing due to FRP lock.

Dr.Fone - Screen Unlock (Android)

Remove Google FRP on Samsung without PIN code or Google accounts.

• Pattern, PIN, password, fingerprints & face screen lock can all be unlocked.
• Bypass Google FRP on Samsung without pin code or Google accounts.
• No tech knowledge asked, everybody can handle it.
• Work for Samsung, Xiaomi, Redmi, OPPO, etc.

4,005,551 people have downloaded it

The process of using the software is user-friendly and thus can also be used by non-techy users.

Steps for removing FRP lock on Android using Dr.Fone Screen Unlock

• Step 1. Launch the installed software and choose the Screen Unlock option from the main interface. Choose Android and then select the Remove Google FRP Lock option.

• Step 2. Select the model brans from the options shown on the interface, and then connect your phone to your PC using a USB cable. The connected device details will appear on the interface.

• Step 3. Follow the next steps as they appear. Once the FRP lock is successfully removed, the prompt window will show its completion. Click Done if you have successfully executed the process.

The above is the brief steps for the process. You can check the bypass Samsung FRP lock guide in detail.

Conclusion

If you are well versed with the commands of ADB and Fastboots you can go ahead and use the ADB bypass FRP tool for removing the FRP lock but if this command line method seems complicated for you, Dr.Fone Screen Unlock is the best tool to use.

Pangu FRP Bypass and Best Alternative Tool For your Android Device

Pangu FRP Bypass is a popular tool claiming to unlock Factory Reset Protection (FRP) on various Android phones. FRP is automatically enabled when you set up your Android device and link it to a Google account.

The FRP lock activates if someone tries to do a factory reset in an untrusted environment without removing the Google account. Without entering your Google credentials, you won’t be able to use your phone. It renders your phone useless for resale or personal use.

Then are you curious about the safety of the Pangu FRP bypass tool? What is this tool, and how does it work? If you have similar questions, this guide has the answers. Here, we’ll show you what you need to know about the bypass tool and alternative software.

Part 1: What Is Pangu FRP Bypass Tool?

FRP is a security feature implemented by Google on Android devices running Lollipop (5.1) and later. It ties your Google account to the Tecno Spark 20 Pro+ device, requiring you to enter the account credentials after a factory data reset. The FRP lock discourages phone theft and protects your data.

The Pangu FRP Bypass tool aims to get around the FRP lock. It grants you access to your device without needing the Google account credentials. The tool uses the loopholes or flaws in the security system to gain access and disable FRP.

The tool can be helpful in situations where you:

• Forgot your Google account credentials

If you can’t remember your Google account password, Pangu FRP unlocker can help you bypass the verification and access your device.

• Bought a used phone

If you purchased a used phone with a previous owner’s Google account linked, the Pangu FRP tool can help you remove that account and set up your own.

• Need to reset your phone but don’t want to lose access

If you need to factory reset your phone but don’t want to lose access to your Google account, it can help you bypass the FRP after the reset.

How Does It Work?

There are two main versions of Pangu FRP Bypass tools:

• Pangu FRP Bypass APK

This app is downloaded and installed on the FRP-locked device. It directs you through steps, using weaknesses to reach hidden settings. By doing so, the Pangu FRP Bypass APK removes the FRP lock, allowing access to the home screen.

• Pangu FRP Bypass Tool for PC

This software runs on your computer and requires connecting your device via USB. It then performs similar operations to the APK version. That is using the computer connection to control the Tecno Spark 20 Pro+ device’s system and bypass the FRP lock.

Is It Legal?

The legality of using the Pangu FRP Bypass remains a gray area. While it’s not inherently illegal, using it for purposes like accessing stolen devices is unlawful. Use it responsibly and ethically.

Part 2: What Are the Supported Brands for the Pangu FRP Bypass Tool?

The Pangu FRP Bypass boasts extensive compatibility with several Android brands, covering:

• Samsung
• Lenovo
• LG
• Oppo
• HTC
• Micromax
• Vivo, and more

Different devices and Android OS versions may have varying compatibility within each brand. That includes Oreo, Marshmallow, and Nougat. Some older or newer models may not support the Pangu FRP Bypass APK, even though it works well on many models. Its file size can also differ based on the version you download.

Part 3: How To Download and Install Pangu FRP Bypass APK?

Before downloading the APK file, you’ll need a USB drive and an OTG cable to connect your Android device to your PC. Once you have these ready, you can move on to the installation steps. Follow the steps below to download and install the Pangu FRP Bypass on your Android phone.

• Step 1: Download the tool’s APK from a trusted source. You can get it from the Pangu official website, if available.

• Step 2: Copy the downloaded tool to a USB drive using a computer.
• Step 3: Connect the USB drive to your FRP-locked Android phone using an OTG cable.
• Step 4: Open the file manager on your Android device, locate the Pangu FRP Bypass APK on the USB drive, and install it. If you encounter issues, proceed to the next steps.
• Step 5: Open the Google Play Store app, then tap the profile icon at the upper-right corner.
• Step 6: Go to Play Protect, then tap the Settings icon at the upper-right side of the screen.

• Step 7: Toggle off the Scan apps with Play Protect option and tap Turn off on the dialogue box. This setting allows the installation of apps from outside the Google Play Store.

Part 4: How To Use Pangu FRP Unlocker on Android?

Before you start, ensure you have permission to unlock the FRP on the Android device. Also, check your internet connection, have enough phone charge, and a backup of your phone data. Now, follow these steps to use Pangu and remove the Google account FRP lock on your phone:

• Step 1: Launch the Pangu FRP bypass on your phone and tap the menu icon in the top right.

• Step 2: Follow the on-screen guide to detect and unlock your device.
• Step 3: Tap the browser sign-in icon and enter a new Google Mail ID. Then, press Next to continue.
• Step 4: Create a password you can remember in the future. Once satisfied, tap the Finish icon to proceed.
• Step 5: Wait for your details to upload. Once completed, restart your Android phone with the designated key combination.
• Step 6: On the Google Mail account page, enter the profile details you created and tap Next. Your device will show, “FRP is trying to accept Gmail + password.“

Part 5: Is Pangu FRP Bypass the Best FRP Removal Tool for You?

Pangu FRP bypass tool is free and works on older Android versions. But there are reasons to consider other options. Let’s explore them.

Technical Knowledge Required

It can be a bit complex to use for some users, especially if you’re not tech-savvy. Using it involves downloading and installing APKs, which can be risky and time-consuming. It’s not as beginner-friendly as some alternatives in the market.

Limited Customer Support

Thetooldoesn’t provide official support via live chat or phone. This leaves you without direct help if issues arise during the bypass process. Depending on online forums for troubleshooting can be time-consuming and unreliable.

Limited Compatibility

Pangu FRP bypass is primarily focused on Samsung devices and may not work on the latest Android brands or versions. Also, it needs an OTG cable and USB drive, making it less convenient. Consider FRP bypass alternatives for broader compatibility and ease.

Safety Concerns

Some Pangu FRP bypass APK versions have been flagged as potentially containing malware or viruses. While this isn’t always the case, it’s crucial to be cautious and download the tool from a trusted source.

Low Success Rate

While the bypass tool can sometimes be effective, its success rate isn’t guaranteed. It can be frustrating if you go through the entire process only to find it didn’t work on your device. Choosing other FRP bypass software with a higher success rate can save you time.

Choosing between Pangu and an alternative depends on your needs and tech skills. If you’re comfortable with downloading APK, Pangu can work. But if you prefer ease of use, broader device compatibility, and safety, consider dedicated tools like Wondershare Dr.Fone - Screen Unlock (Android).

Part 6: Wondershare Dr.Fone - Screen Unlock for Android: Best Alternative to Pangu

Dr.Fone is one of the best alternative tools for Pangu FRP bypass. With its user-friendly and intuitive interface, you can effortlessly remove the FRP lock in several steps. Dr.Fone is a reliable choice to bypass Google FRP on Android, even if you don’t have a Google account or PIN code. Dr.Fone - Screen Unlock can bypass FRP and is compatible with Samsung, Vivo, Realme, Oppo, Redmi, and Xiaomi Android phones.

Aside from that, it can also do the following:

• Remove four types of lock screens: pattern, PIN, fingerprint, and password.
• Unlock your lock screen without erasing your data so you can access your phone.

How To Use Dr.Fone - Screen Unlock To Bypass Google FRP?

If your Android OS is version 14 or below, Dr.Fone can help you eliminate the FRP lock on Android in a few minutes. Download the app, launch it on your computer, and follow the steps below.

• Step 1: Connect your phone to your desktop using a USB cable, then select Screen Unlock from the Toolbox homepage.

• Step 2: Select Android as your device type to continue the FRP bypass process.

• Step 3: Select Remove Google FRP Lock on the next screen.

• Step 4: Select your phone brand from the list of supported brands, then click Start to proceed.

• Step 5: Follow the next in-app instructions, which may vary based on the brand of your Android device.
• Step 6: Wait while Dr.Fone removes the FRP lock on your phone.

• Step 7: Click Done to confirm successful FRP bypass or click Try Again to repeat the process (available for Samsung devices.)

Conclusion

Bypassing FRP on Android can be challenging. Downloading APK tools like Pangu FRP Bypass may be unreliable and risky. They often lack support for newer devices and have an inconsistent success rate.

Wondershare Dr.Fone offers an easier, faster, and user-friendly solution for bypassing FRP on almost all Android models, regardless of their version. Its intuitive interface and high success rate empower you to regain access to your devices. Don’t let a locked screen stand in the way of your data. Explore Dr. Fone’s Screen Unlock (Android) tool for a reliable solution to future FRP-lock issues.

Tips: Searching for a powerful FRP bypass tool? No worries as Dr.Fone is here to help you. Download it and start a seamless unlock experience!