5 Quick Methods to Bypass Tecno Spark 10 4G FRP

Google Factory Reset Protection, a.k.a FRP, is developed by Google for all Android phones. It adds an extra layer of security to your phone and the data on it. It is aimed at making it difficult for the illegal holder of your phone to factory reset your phone and remove tracking information. Then why do we need to discuss the Tecno Spark 10 4G FRP bypass?

Though the protection is meant for you, sometimes you may forget the password and want your Tecno Spark 10 4G FRP removed. Also, if you bought a used phone and the previous user has set up FRP with her password, you need to bypass it.

Part 1: In what cases does the Tecno Spark 10 4G FRP bypass works?

How and why should I bypass Tecno Spark 10 4G FRP? Let us look at the valid reasons.

1. Buy a locked second-hand Tecno

When you buy a second-hand phone, ideally, the previous user must format and hard reset the Tecno phone to remove all locks and password requirements. However, if it doesn’t happen, you cannot use some options on your phone and configure security because of FRP. Here, your savior is the option of the Tecno Spark 10 4G FRP bypass.

2. Forget Google account ID and password

Even if you have locked your Tecno phone yourself, you are stuck when you forget your Google username and password. So, you can only recover your phone using the Tecno Spark 10 4G FRP bypass.

3. The person with a Tecno from his company no longer works for it

Some employees also receive official phones from their company which they have to return when they leave the company. Now, it becomes a horror story for the new employee if he gets the same phone locked with the previous user’s ID.

Part 2: 5 quick methods to bypass Tecno Spark 10 4G FRP

Ok, now this is established that there are certain situations when you need to conduct a Tecno Spark 10 4G FRP bypass. So how do you do the Tecno Spark 10 4G FRP bypass?

Method 1. Retrieve your Google account from another device

If your phone is locked with a Google account whose password you do not know or have forgotten, then you can use this method to Tecno Spark 10 4G FRP bypass. In this method, you can try to retrieve your Google account from another device. It is a simple step-by-step process tha can be completed from a PC or another mobile device.

If you have forgot the email address but remember the password, then follow these steps.

1. Navigate to Google’s Find My Email page in your browser.

When you can’t remember the email address that was configured, go to the Find My Email page and start account recovery process.

2. Enter your recovery email or phone number

On the next screen, provide a recovery email or phone number and click Next.

3. Provide your first and last name

Enter your first and last name in the given form and click Next.

4. Verification code

Google will send a verification code to the setup recovery email or phone number, click Send.

5. Verification code entry

Check your email inbox or phone messages depending on the recovery method and find the verification code. Enter it in the given form. If it is correct, you can go to the next final step.

6. Choose an account

From the list of accounts showing on the screen, select the account you want to recover.

7. Enter your password

Enter the password in the text box and you are done.

If you remember the email but not the password, then the Tecno Spark 10 4G FRP bypass method will go like this.

1. Google’s Account Recovery page

Navigate to the Account Recovery page from the browser on your PC or other mobile devices.

2. Enter your email address

Fill in the form with your Google account and click Next.

3. Enter the last password you remember

The next form will ask you to enter the last password you remember and that worked

Now, you will receive a message to your registered device, to verify it’s you. Open it and click , Yes, it is me.

Now, wait for six hours for Google to verify it’s you and then they will send a password reset link to your email.

Now, what if you can’t remember your last password, then use the next method.

4. Click on “Try another way”

Now Google will send a message to your phone to verify it’s you. On your phone, open the message and click Yes, it’s me.

After verification, Google will send you a password reset link after six hours.

If your phone is not registered in your Google account then, try the next method.

5. Click on “Try another way” again

If your phone is enabled to check for the code, click Try another way again.

Google will then ask you to send a verification code to your registered phone number. Click Send.

Find the code from your messages, enter it, and click Next.

Now again, you will wait for six hours till Google sends the password reset link to your email.

Method 2. Use FRP Bypass APK

FRP bypass APK is another tool you can use to Tecno Spark 10 4G FRP bypass easily. Let us see how it works step by step.

• Download FRP Bypass APK for Tecno Spark 10 4G FRP bypass android 11.
• Once it’s downloaded, open the File Manager using the Open Files app
• Find the suitable Apk and click on it
• Install & open the APK.
• Open the browser on your phone.
• Launch any of these two below URL.
  • https://tiny.cc/frptools
  • https://bit.ly/2NKxXYs
• Go to the FRP bypass APK >FRP APPS section
• Open Settings leading to the Tecno Spark 10 4G device Settings>System Settings> Backup & Reset >Reset Phone
• Now click on Reset System Settings Only, and confirm Reset System Settings Only.
• Select Erase All data and confirm.
• Your device will be rebooted.
• Wait till the factory reset process completes.

Now, reboot your device and set it up according to your requirements.

Method 3. Deactivate FRP

Another way to come around Tecno Spark 10 4G FRP bypass is to deactivate FRP. Let us follow the step-by-step process.

1. Launch the “Settings” app and scroll to the Apps.
2. Click on the “Manage apps” (applications) and then the “All” tab.
3. Open “Google App.”
4. Click on the “Clear cache” to remove the Google account cache.

5. Also, clear all data to erase data stored.
6. Click the “Back” button, and go to “Gmail.”
7. Click on the “Clear cache” and “Clear data.”

8. In the Tecno Spark 10 4G device Settings menu and click “Data synchronization.” When your device asks you to enter your Google account, enter your new Gmail account.

You have successfully completed the Tecno Spark 10 4G FRP bypass process.

Method 4. Bypass with SideSync

You can use SideSync to share the screen and data between your computer and mobile phone. How can we use this for FRP bypass?

1. Download the SideSync from the official site and install the SideSync application on your computer.

2. Connect your phone and computer to the Google account verification screen.
3. Now plug in the first end of your OTG adapter with your phone and connect another end to the flash drive with APK.
4. Your phone will launch the file explorer automatically, showing the root directory of the flash drive.
5. Now click on the APK file.
6. Click Settings and allow to install from Unknown sources, and click OK.
7. After installation, open SideSync.
8. Disconnect the OTG cable from your Samsung phone.
9. Now access the Settings menu and go to the Backup & reset option and conduct a factory reset.

Method 5. 3 Steps to Bypass Tecno FRP Bypass

Dr.Fone - Screen Unlock (Android) is a reliable and efficient tool designed to help users bypass FRP (Factory Reset Protection) locks on Android devices, including Tecno smartphones. This powerful software provides a hassle-free solution for those locked out of their Tecno devices due to FRP lock. With its user-friendly interface and advanced features, Dr.Fone makes FRP bypassing a straightforward process, even for users with limited technical knowledge.

Dr.Fone - Screen Unlock (Android)

Remove Google Lock (FRP) from Tecno Devices

• Pattern, PIN, password, fingerprints & face screen lock can all be unlocked.
• Bypass Android FRP lock without a PIN or Google account.
• Unlock mainstream Android brands like Samsung, Tecno, Xiaomi, etc.
• No tech knowledge required, Simple, click-through, process.

3,981,454 people have downloaded it

3 Steps to Bypass Tecno FRP Lock with Dr.Fone - Screen Unlock (Android)

• Step 1. After installing Dr.Fone - Screen Unlock (Android), launch the program and select the “Screen Unlock” option from the main menu. Continue to Android > Remove Google FRP Lock.

• Step 2. Then select Tecno and click the Start button to continue. Then, connect your locked Tecno device to the computer using a USB cable. Ensure that USB debugging is enabled on your Tecno device before proceeding with the next steps.

• Step 3. Once your Tecno device is successfully connected, Dr.Fone - Screen Unlock (Android) will automatically detect it. Follow the on-screen instructions to put your Tecno device into specic mode. Once in the correct mode, Dr.Fone will start downloading the necessary firmware to bypass the FRP lock.

During the process, it’s crucial to keep your device connected to the computer and refrain from disconnecting it until the bypass is complete. After the firmware download is finished, Dr.Fone will initiate the FRP lock bypass process. Once completed, your Tecno device will restart, and you’ll regain access to it without encountering the FRP lock.

safe & secure

The Bottom Line

FRP is a great feature to add security to Android phones. However, sometimes it is necessary to bypass it to fully use your phone. When you are stuck with an FRP lock, it is a frustrating situation, especially when you want to factory reset your phone. We have described various methods so that you choose the best solution according to your requirements for the Tecno Spark 10 4G FRP bypass. Among them, bypassing Tecno FRP lock is made simple and efficient with Dr.Fone - Screen Unlock (Android). Say goodbye to FRP lock frustrations and regain access to your Tecno device swiftly with Dr.Fone - Screen Unlock (Android) .

safe & secure

Tecno Spark 10 4G ADB Format Tool for PC vs. Other Unlocking Tools: Which One is the Best?

In today’s digital era, efficient and secure data management is crucial. That’s where the Tecno ADB Format Tool comes in handy! Tecno ADB Format Tool for PC is one such Windows-based software that helps in unlocking patterns, passwords, and FRP locks from the Android-based Tecno devices. In this post, we’ll guide you through its features, installation process, and usage. Additionally, we’ll explore the benefits it offers, how to troubleshoot common issues, and connecting it with other mobile unlocker solutions currently available; so you can decide which tool serves as the ideal solution for your needs!

The article below will let you learn all about this Tecno unlock tool, and it’s working.

Part 1. What is Tecno ADB Format Tool?

The Tecno ADB Format Tool is a computer application designed to help you format and unlock your Tecno device. It utilizes the Android Debug Bridge (ADB) protocol to communicate with your device and perform various operations, such as removing FRP (Factory Reset Protection) lock, deleting screen unlock patterns, and much more.

Tecno ADB Format Tool 2021: Special Features

The Tecno ADB Format Tool 2021 is a special function or software for Tecno device users. This functional tool usually helps unlock passwords, any type of locks, or blocks. This software is not provided with the Tecno Spark 10 4G device. It is an independent tool that offers an efficient solution for formatting and unlocking your Tecno device. With a wide range of features, the Tecno ADB Format Tool 2021 can greatly enhance your device usage experience.

• A Windows-based free tool that is easy to use.
• Works with all Tecno phones running on Android 5.0 and above.
• Allows removing all types of screen locks as well as FRP locks on Tecno phones.
• The interface is simple, which makes the tool apt even for users without much technical knowledge.
• A small-sized app that works on Windows 32-bit and Windows 64-bit systems without occupying much space.

Benefits of Using Tecno ADB Format Tool

Using the Tecno ADB Format Tool offers several benefits. Here are the key ones:

• Data Security and Privacy: This tool allows you to remove the FRP lock from your device, ensuring that your personal data remains safe in case of loss or theft.
• Efficient Device Formatting: The Tecno ADB Format Tool provides a quick and efficient way to format your device, removing unwanted files, apps, and settings in just one click.
• Compatibility with Tecno Devices: Specifically developed for Tecno devices, this tool ensures a smooth and hassle-free interaction with your device.

Disadvantages of using Tecno ADB Format Tool

Despite the numerous advantages, using the Tecno ADB Format Tool also has some drawbacks. Here are a few:

• Data loss: If used improperly, this tool can lead to the loss of important data. It is therefore essential to back up the data before using the tool.
• Need for specific skills: Using the Tecno ADB Format Tool requires a certain level of expertise and understanding of how Android devices work. For inexperienced users, this could pose a challenge.
• Risk of device damage: Improper use of the tool can result in device malfunction or even damage.
• Limited to Tecno devices and Windows system only: This tool, being specifically developed for Tecno devices, is not compatible with other brands of Android devices. Available for download only on the Windows system.

Important Note: The above guide for bypassing FRP lock using Tecno ADB Format Tool should be used only by the real owners of the Tecno device and for educational purposes. If you are using the guide above for unlocking a stolen phone, it is a serious and punishable crime, and you can also be jailed for this.

Part 2: What Can Tecno ADB Format Tool Do?

Tecno ADB format tool is small utility software for your Tecno devices. It offers services like FRP lock removal and pattern lock removal. Here, FRP is factory reset protection, a built-in security feature for all Android devices to secure them against easy factory reset in case of illegal access to the Tecno Spark 10 4G device.

1. Remove FRP Lock

But, sometimes, as the Tecno Spark 10 4G device owner, we fall prey and forget the credentials that let us log in to our device. The Tecno ADB Format tool is a program that helps you to troubleshoot and bypass the FRP lock on your Tecno phone. You can use this tool to bypass the FRP lock or pattern security on your Tecno phone and can also factory reset your phone. There are many Tecno ADB format tools available online; let us show you how they generally work.

2. Remove Pattern Lock

Pattern locks are a very popular way of screen locking Tecno phones; however, if you forget your pattern setting, you are in trouble. Tecno ADB format tool can help you here for bypassing your pattern lock.

Part 3: How to Download and Bypass FRP with Tecno ADB Format Tool?

The part below will help you to learn the process of downloading, installing, and using the Tecno ADB Format Tool.

Download the Link for the Tecno ADB Format Tool

You can obtain the Tecno ADB Format Tool by clicking on the following download link: : Tecno ADB Format Tool

How to Install Tecno ADB Format Tool?

• Step 1. The Tecno ADB Format Tool can be downloaded from the official site after which the file can be unzipped and installed on your Windows system.
• Step 2. Since the tool is only a few MBs in size, it will not occupy much space.
• Step 3. The guide instructions will appear on your screen, following which you can easily install the tool on your system.
• Step 4. Ensure that the USB drivers are installed on your system so that the Tecno device can be connected smoothly to your PC.
• Step 5. Using the USB Driver, connect your Tecno phone to your PC and then double-click on the tool.
• Step 6. On the main Tecno ADB Format Tool interface, click on the Remove FRP Lock option.
• Step 7. The process will now take a few minutes, and after it is done, some Google credentials will be asked on the Tecno Spark 10 4G device for logging in.

How Does the Process Work?

The steps for the working of the tool are enlisted below.

• Step 1. Switch off your Tecno phone and ensure that VCOM and MTK drivers are present to enable the connection of the phone with the PC.
• Step 2. Press and hold the Power and Volume UP keys till the Recovery and Reboot options appear on the screen.
• Step 3. Select the Recovery option using the Volume Key and to confirm the same, use the Power key.
• Step 4. Next, tap on the Advanced button and then click on Reboot with ADB.
• Step 5. Connect your phone to your PC using a USB cable and switch on the Tecno Spark 10 4G device.
• Step 6. Now, on your system, open Tecno ADB Format Tool and enter the similar port number at the Tecno Spark 10 4G device Manager at the tool.
• Step 7. To bypass the FRP lock, you need to click on the BTN2 button on your phone.
• Step 8. The process of bypassing the lock will complete as the Finish message appears.

The device will now boot up and all the data will be formatted.

Part 4: The Best Alternative to the Tecno ADB Format Tool [Remove Pattern & FRP Lock, highest success rate]

The Tecno ADB Format Tool is a utility primarily used for formatting Tecno devices, removing screen locks, and bypassing FRP locks. While it has served its purpose for many Tecno users, it does come with limitations. Users often find it challenging to use, especially if they are not tech-savvy. Additionally, the tool may not be compatible with all Tecno models and Android versions.

The Best Alternative: Dr.Fone - Screen Unlock (Android)

Dr.Fone - Screen Unlock (Android) stands out as an excellent alternative to the Tecno ADB Format Tool. Developed by Wondershare, a trusted name in the software industry, this tool offers a user-friendly interface and a higher success rate in bypassing Tecno FRP locks and removing patterns. Dr.Fone provides a simple and intuitive interface that even beginners can navigate effortlessly. The step-by-step process ensures that you can bypass FRP locks and remove patterns with ease. Here are some key reasons why Dr.Fone is the best choice:

Dr.Fone - Screen Unlock (Android)

The Best ADB Alternative Tecno Pattern Unlock Tool

• 4 screen lock types are available on your Vivo: pattern, PIN, password & fingerprints.
• Bypass Android FRP lock without a PIN or Google account.
• Everybody can handle it without any technical background. Dr.Fone offers 24/7 customer support to assist you throughout the unlocking process.
• Dr.Fone boasts a high success rate in bypassing FRP locks and removing patterns, ensuring that you can access your Tecno device quickly.

4,008,671 people have downloaded it

How to Bypass Tecno FRP Lock and Remove Pattern with Dr.Fone?

Here is a step-by-step guide on how to use Dr.Fone - Screen Unlock (Android) to bypass Tecno FRP locks and remove patterns:

• Step 1. Begin by downloading and installing Dr.Fone - Screen Unlock (Android) on your computer. Launch the program and select “Screen Unlock” from the main menu.

• Step 2. Using a USB cable, connect your phone to your PC and Choose either “Remove Screen Lock” or “Remove Google Lock (FRP)” based on your specific situation.

• Step 3. Dr.Fone will guide you through the process of unlocking your device. Simply follow the on-screen instructions, and the software will take care of the rest.

• Step 4. Once the process is complete, your Tecno device will be unlocked, and you can regain access without any pattern or FRP lock hassles.

Part 5. Tecno ADB Format Tool vs. Dr.Fone - Screen Unlock: A Comparison

In this part, we’ll compare two popular solutions in the market - Tecno ADB Format Tool and Dr.Fone - Screen Unlock (Android), to determine which one takes the crown for being the most efficient, user-friendly, and cost-effective option for Tecno users.

Name	Tecno ADB Format Tool	Dr.Fone - Screen Unlock (Android)
Ease of Use	This tool is straightforward. Even if you’re a first-time user, you’ll easily grasp how to navigate the tool due to its minimalistic layout and clearly defined functions.	Compared to the Tecno ADB Format Tool, Dr.Fone offers a more polished user interface. It provides step-by-step instructions making the unlocking
Features	This tool allows users to bypass FRP and Pattern lock from Tecno phones, providing a quick solution to unlock the Tecno Spark 10 4G device.	Dr.Fone - Screen Unlock (Android) removes pattern, PIN, password, and fingerprint screen locks, bypasses Android FRP lock without a PIN or Google account, and unlocks major Android brands such as Samsung, Vivo, Xiaomi, and more.
Compatibility	Designed exclusively for Tecno smartphones (Requires Android OS 5.0 or later), this tool is tailored to operate solely on Windows systems.	Dr.Fone extends its support beyond Vivo, covering a range of other brands like Samsung, LG, Motorola, and more (Requires Android OS 2.1 or later). It is versatile, applicable to both Windows and Mac systems.
User Reviews	Users commend its simplicity and effectiveness. However, some users have expressed disappointment due to its limited compatibility.	It has positive reviews for its extensive features and wide compatibility. Some users, however, find it a bit expensive.
Pricing	One of its major selling points is that it’s completely free.	It offers a free trial, but the full version comes at a price. However, considering the vast array of features, it offers value for money.
User Testimonials and Case Studies	One user stated, “I got locked out of my Tecno phone and this tool was a lifesaver. It’s simple and efficient. I just wish it supported other brands as well”.	A satisfied customer shared, “Dr.Fone is more than just an unlocking tool. It’s a complete package. The price is worth it considering the features it offers.”

Both tools serve their purpose effectively. If you’re looking for a free and simple solution specifically for Tecno smartphones, Tecno ADB Format Tool is your go-to option. However, if you want a comprehensive software suite that serves multiple purposes and supports a wide range of brands, Dr.Fone - Screen Unlock (Android) is worth considering. Remember, the best tool depends on your specific needs and budget.

Part 6. FAQs about the Tecno ADB Format Tool

1. Is the Tecno ADB Format Tool safe to use?

Yes, it is safe to use. However, it is recommended to back up your data before using it.

2. For which Tecno model devices is ADB Format Tool compatible?

No need to fret – the tool supports almost all Android models. Specifically, it is confirmed to work with the Tecno V series, Tecno Y series, Tecno Z series, Tecno S series, and other latest devices. However, for older series Tecno devices, we cannot provide a guarantee. In such instances, it is advisable to reach out to customer care or seek assistance online.

3. Can I run the Tecno ADB format tool on mac?

While the Tecno ADB Format Tool is designed for Windows, if you’re a Mac user looking for a reliable screen unlocking solution, consider Dr.Fone - Screen Unlock (Android) . It’s a versatile tool compatible with both Windows and Mac operating systems, ensuring a seamless experience for users on either platform. This recommendation aligns with your need for a Mac-compatible screen unlock tool.

Conclusion

ADB Format Tool for PC is a decent tool for trying to bypass the FRP lock on your Tecno devices. If you are looking for software that can let you remove all types of screen locks not only on Tecno but on an array of other Android devices, Dr.Fone - Screen Unlock (Android) is an excellent choice.

Tips: The need for bypassing the FRP lock arises in the situation when a factory reset of the Tecno Spark 10 4G device has to be done. In general situations, the most common lock that needs to be bypassed is the screen lock on your Tecno and other devices. People keep a lock on their phone screen using a PIN code, passcode, pattern, fingerprint, or a face code to prevent its access from unauthorized people. Forgetting these locks is one of the most common issues which results in making your device not usable.

In such conditions, you would need a reliable tool that can help you bypass the screen lock, and here are 100% vote goes to  Dr.Fone - Screen Unlock (Android) which is PC-based and Mac-based software that is capable of bypassing all types of screen locks on your Android devices in a simple, quick manner. Compatible with all popular Android devices including Samsung, LG, Xiaomi, Oppo, Vivo, and many others, the tool works even on the latest Android version. Simple steps, intuitive interface, and quick process make Dr.Fone - Screen Unlock (Android) the favorite software among the users.

Ultimate Guide on Tecno Spark 10 4G FRP Bypass

FRP (Factory Reset Protection) is an Activation Lock system for preventing unauthorized Factory Resetting on your Tecno phone. But if you forget your Google Account credentials, you might want to learn a few Tecno Spark 10 4G FRP bypass techniques. So this 3-minute read discusses the most effective Tecno FRP bypass methods. Note that these methods apply to all Tecno phone models, including Spark, Comon, Pop, etc.

Part 1: What Will You Get After Tecno Spark 10 4G FRP Bypass Android 11?

FRP is a mandatory security system embedded in Android 5.1 (Lollipop) or newer. But there are many reasons why you may want to bypass Tecno FRP. Here are some of them:

You’re the new owner and get whole control of your Tecno phone

Did your cousin or parent send you their Tecno phone but forget to Factory Reset it? If that person is living far from you, that can be a real challenge. So, unless they give you their Gmail credentials, you might be stuck and unable to use the phone. If you bypass FRP, you’ll reset the phone and restore it to its brand-new state.

Remove viruses and malware

Although uncommon, your Android phone can start malfunctioning due to a virus or malware infection. You can get these unwanted programs from unknown email attachments, file downloads, website links, etc. So, because merely deleting these files won’t resolve the issue, you’ll need to bypass Tecno FRP to Factory Reset the phone and erase everything. Fortunately, you don’t need a phone technician to help you with that.

Increase the resale value

Sometimes you may need to do away with your old Tecno phone after purchasing a brand-new one. So, instead of keeping or gifting it out, you can sell it and recoup a few coins. Unfortunately, most buyers will want the phone in its brand-new state so that they can install their own apps, add music, movies, etc. If you don’t Factory Reset the phone, your bargaining power also reduces. I’m sure you don’t want that.

Important note: Bypassing FRP is absolutely legal and easy too. But some users may look to bypass FRP on a stolen phone. That’s why we clarify that this post is strictly for educational purposes. Get the consent of the original owner of the phone before bypassing FRP.

Part 2: How to Bypass Google FRP on Tecno Android 11 without PC

Now that you have all the reasons to bypass FRP on Tecno Spark 10 4G or any other model, let me introduce you to the best method to avoid this feature without a PC. TechnoCare APK is an Android software that allows Tecno users to bypass FRP on any Tecno brand. It’s straightforward; this app lets you create another Google Account on your locked Tecno phone without unlocking it. In short, you’ll link a new Google Account with a password that you can easily remember.

TechnoCare APK Features

• Safe and straightforward Android APK.
• Install custom ROMs on Tecno.
• No registration is required.
• No age restrictions to use.
• User-friendly and quick FRP unlock.

Steps to bypass Tecno Spark 10 4G FRP with TechnoCare APK

• Step 1: Start by enabling the Talkback feature on your phone. To do that, tap the Home key three times consecutively on the welcome screen.
• Step 2: Now go to the Talkback Menu and then open Talkback Settings. Then, click the Search icon and enter “Getting started with Talkback.”
• Step 3: Play the video on the “Getting Started” screen. Then, tap the three dots before clicking the Share > Google Plus icon.
• Step 4: YouTube will open where you’ll tap “Terms and Privacy Policy” to open the Google browser. Here, click Bookmarks and then tap History.
• Step 5: The Download History will open with File Manager, where you’ll click My Files and then choose SD card.
• Step 6: After opening the SD card directory, tap Apex Launcher APK and install Apex Launcher. The menu will automatically transform to the Apex Launcher interface.
• Step 7: Now click Settings and then tap Lock Screen and Security. Then, tap Other Security Settings > Device Administrators. After that, disable the Find My Device option.
• Step 8: Navigate back to the Tecno Spark 10 4G device Settings and choose App. Then, tap the Ellipsis icon and tap “Show system apps.” From the list, choose Google Account Manager and disable it. Do the same with Google Play Services.
• Step 9: Open the downloaded TechnoCare FRP APK and install the Technocare app. After installing it, tap Next and then tap Settings > Accounts. Now choose Add account to add another Google Account.
• Step 10: Go to Device Administrator and enable Android Device Manager.
• Step 11: Navigate back to Settings, click Apps, and enable Google Play Services and Google Account Manager.
• Step 12: Lastly, restart the locked phone and enjoy the services.

Part 3: How to Bypass All Tecno Locked Screens without Password

Unlocking FRP using TechnoCare APK is free, quick, and exciting. However, sometimes you may want to unlock your PIN, password, pattern, and other lock systems that you might have forgotten. In that case, use Wondershare Dr.Fone . It’s a desktop program that lets you unlock passwords, PINs, and patterns on Tecno, Samsung, Nokia, OPPO, Xiaomi, and other Android phone brands.

Dr.Fone - Screen Unlock (Android)

Get into Locked Tecno Locked Screens without Password

• Pattern, PIN, password, fingerprints & face screen lock can all be unlocked.
• Unlock 20,000+ models of Android phones & tablets.
• Everybody can handle it without any technical background.
• Provide specific removal solutions to promise good success rate.

4,008,669 people have downloaded it

Let’s walk through the simple steps:

• Step 1: Install and run Dr.Fone on your PC and connect your Android phone to the PC using USB.
• Step 2: Then, click Screen Unlock > Android and tap Unlock Android Screen.

• Step 3: Select the Tecno Spark 10 4G device brand Tecno that you want to unlock the screen.

• Step 4: Lastly, follow Dr.Fone’s on-screen instructions to enter the specific mode and unlock your phone. That’s it!

You can watch the video below to unlock Tecno patterns, passwords, PINs, and fingerprints with Wondershare Dr.Fone

Part 4: How to Disable Google FRP Feature on Tecno

You don’t always need to Factory Reset your phone before selling it or handing it over to someone else. Instead, you can manually disable the Activation Lock feature and let the new owner Factory Reset it by themselves. Follow me:

• Step 1: Open Settings and then click Accounts.
• Step 2: Tap Google, and then you’ll see all the linked Google Accounts.
• Step 3: Tap the Google Account you want to remove and tap the Ellipsis icon on the upper-right corner.
• Step 4: Click Remove Account and press Ok to erase the Gmail account. You can remove all the linked accounts if you want.

Conclusion

And that’s the best Tecno Android 11 FRP bypass method. With TechnoCare APK, you can quickly bypass APK by adding a different Google Account with an easy-to-remember password. Also, use Dr.Fone to unblock PIN, password, pattern, TouchID, and FaceID on Tecno and other Android brands. And another thing, you can manually disable FRP before selling or gifting your phone away. I hope this helps!

safe & secure

Also read: