5 Quick Methods to Bypass Itel S23+ FRP

Google Factory Reset Protection, a.k.a FRP, is developed by Google for all Android phones. It adds an extra layer of security to your phone and the data on it. It is aimed at making it difficult for the illegal holder of your phone to factory reset your phone and remove tracking information. Then why do we need to discuss the Itel S23+ FRP bypass?

Though the protection is meant for you, sometimes you may forget the password and want your Itel S23+ FRP removed. Also, if you bought a used phone and the previous user has set up FRP with her password, you need to bypass it.

Part 1: In what cases does the Itel S23+ FRP bypass works?

How and why should I bypass Itel S23+ FRP? Let us look at the valid reasons.

1. Buy a locked second-hand Itel

When you buy a second-hand phone, ideally, the previous user must format and hard reset the Itel phone to remove all locks and password requirements. However, if it doesn’t happen, you cannot use some options on your phone and configure security because of FRP. Here, your savior is the option of the Itel S23+ FRP bypass.

2. Forget Google account ID and password

Even if you have locked your Itel phone yourself, you are stuck when you forget your Google username and password. So, you can only recover your phone using the Itel S23+ FRP bypass.

3. The person with a Itel from his company no longer works for it

Some employees also receive official phones from their company which they have to return when they leave the company. Now, it becomes a horror story for the new employee if he gets the same phone locked with the previous user’s ID.

Part 2: 5 quick methods to bypass Itel S23+ FRP

Ok, now this is established that there are certain situations when you need to conduct a Itel S23+ FRP bypass. So how do you do the Itel S23+ FRP bypass?

Method 1. Retrieve your Google account from another device

If your phone is locked with a Google account whose password you do not know or have forgotten, then you can use this method to Itel S23+ FRP bypass. In this method, you can try to retrieve your Google account from another device. It is a simple step-by-step process tha can be completed from a PC or another mobile device.

If you have forgot the email address but remember the password, then follow these steps.

1. Navigate to Google’s Find My Email page in your browser.

When you can’t remember the email address that was configured, go to the Find My Email page and start account recovery process.

2. Enter your recovery email or phone number

On the next screen, provide a recovery email or phone number and click Next.

3. Provide your first and last name

Enter your first and last name in the given form and click Next.

4. Verification code

Google will send a verification code to the setup recovery email or phone number, click Send.

5. Verification code entry

Check your email inbox or phone messages depending on the recovery method and find the verification code. Enter it in the given form. If it is correct, you can go to the next final step.

6. Choose an account

From the list of accounts showing on the screen, select the account you want to recover.

7. Enter your password

Enter the password in the text box and you are done.

If you remember the email but not the password, then the Itel S23+ FRP bypass method will go like this.

1. Google’s Account Recovery page

Navigate to the Account Recovery page from the browser on your PC or other mobile devices.

2. Enter your email address

Fill in the form with your Google account and click Next.

3. Enter the last password you remember

The next form will ask you to enter the last password you remember and that worked

Now, you will receive a message to your registered device, to verify it’s you. Open it and click , Yes, it is me.

Now, wait for six hours for Google to verify it’s you and then they will send a password reset link to your email.

Now, what if you can’t remember your last password, then use the next method.

4. Click on “Try another way”

Now Google will send a message to your phone to verify it’s you. On your phone, open the message and click Yes, it’s me.

After verification, Google will send you a password reset link after six hours.

If your phone is not registered in your Google account then, try the next method.

5. Click on “Try another way” again

If your phone is enabled to check for the code, click Try another way again.

Google will then ask you to send a verification code to your registered phone number. Click Send.

Find the code from your messages, enter it, and click Next.

Now again, you will wait for six hours till Google sends the password reset link to your email.

Method 2. Use FRP Bypass APK

FRP bypass APK is another tool you can use to Itel S23+ FRP bypass easily. Let us see how it works step by step.

• Download FRP Bypass APK for Itel S23+ FRP bypass android 11.
• Once it’s downloaded, open the File Manager using the Open Files app
• Find the suitable Apk and click on it
• Install & open the APK.
• Open the browser on your phone.
• Launch any of these two below URL.
  • https://tiny.cc/frptools
  • https://bit.ly/2NKxXYs
• Go to the FRP bypass APK >FRP APPS section
• Open Settings leading to the Itel S23+ device Settings>System Settings> Backup & Reset >Reset Phone
• Now click on Reset System Settings Only, and confirm Reset System Settings Only.
• Select Erase All data and confirm.
• Your device will be rebooted.
• Wait till the factory reset process completes.

Now, reboot your device and set it up according to your requirements.

Method 3. Deactivate FRP

Another way to come around Itel S23+ FRP bypass is to deactivate FRP. Let us follow the step-by-step process.

1. Launch the “Settings” app and scroll to the Apps.
2. Click on the “Manage apps” (applications) and then the “All” tab.
3. Open “Google App.”
4. Click on the “Clear cache” to remove the Google account cache.

5. Also, clear all data to erase data stored.
6. Click the “Back” button, and go to “Gmail.”
7. Click on the “Clear cache” and “Clear data.”

8. In the Itel S23+ device Settings menu and click “Data synchronization.” When your device asks you to enter your Google account, enter your new Gmail account.

You have successfully completed the Itel S23+ FRP bypass process.

Method 4. Bypass with SideSync

You can use SideSync to share the screen and data between your computer and mobile phone. How can we use this for FRP bypass?

1. Download the SideSync from the official site and install the SideSync application on your computer.

2. Connect your phone and computer to the Google account verification screen.
3. Now plug in the first end of your OTG adapter with your phone and connect another end to the flash drive with APK.
4. Your phone will launch the file explorer automatically, showing the root directory of the flash drive.
5. Now click on the APK file.
6. Click Settings and allow to install from Unknown sources, and click OK.
7. After installation, open SideSync.
8. Disconnect the OTG cable from your Samsung phone.
9. Now access the Settings menu and go to the Backup & reset option and conduct a factory reset.

Method 5. 3 Steps to Bypass Itel FRP Bypass

Dr.Fone - Screen Unlock (Android) is a reliable and efficient tool designed to help users bypass FRP (Factory Reset Protection) locks on Android devices, including Itel smartphones. This powerful software provides a hassle-free solution for those locked out of their Itel devices due to FRP lock. With its user-friendly interface and advanced features, Dr.Fone makes FRP bypassing a straightforward process, even for users with limited technical knowledge.

Dr.Fone - Screen Unlock (Android)

Remove Google Lock (FRP) from Itel Devices

• Pattern, PIN, password, fingerprints & face screen lock can all be unlocked.
• Bypass Android FRP lock without a PIN or Google account.
• Unlock mainstream Android brands like Samsung, Itel, Xiaomi, etc.
• No tech knowledge required, Simple, click-through, process.

3,981,454 people have downloaded it

3 Steps to Bypass Itel FRP Lock with Dr.Fone - Screen Unlock (Android)

• Step 1. After installing Dr.Fone - Screen Unlock (Android), launch the program and select the “Screen Unlock” option from the main menu. Continue to Android > Remove Google FRP Lock.

• Step 2. Then select Itel and click the Start button to continue. Then, connect your locked Itel device to the computer using a USB cable. Ensure that USB debugging is enabled on your Itel device before proceeding with the next steps.

• Step 3. Once your Itel device is successfully connected, Dr.Fone - Screen Unlock (Android) will automatically detect it. Follow the on-screen instructions to put your Itel device into specic mode. Once in the correct mode, Dr.Fone will start downloading the necessary firmware to bypass the FRP lock.

During the process, it’s crucial to keep your device connected to the computer and refrain from disconnecting it until the bypass is complete. After the firmware download is finished, Dr.Fone will initiate the FRP lock bypass process. Once completed, your Itel device will restart, and you’ll regain access to it without encountering the FRP lock.

safe & secure

The Bottom Line

FRP is a great feature to add security to Android phones. However, sometimes it is necessary to bypass it to fully use your phone. When you are stuck with an FRP lock, it is a frustrating situation, especially when you want to factory reset your phone. We have described various methods so that you choose the best solution according to your requirements for the Itel S23+ FRP bypass. Among them, bypassing Itel FRP lock is made simple and efficient with Dr.Fone - Screen Unlock (Android). Say goodbye to FRP lock frustrations and regain access to your Itel device swiftly with Dr.Fone - Screen Unlock (Android) .

safe & secure

The Updated Method to Bypass Itel S23+ FRP

Android smartphones have a security feature called FRP (Factory Reset Protection) that shields user data from theft or loss. Like other manufacturers, Itel uses FRP as a security feature to make sure that, in the event of a factory reset, only the original owner with the Google account credentials linked with the Itel S23+ device would be able to access the Itel S23+ device. This aids in preventing the Itel S23+ device’s theft or unauthorized use.

FRP, however, can also be a problem if a user forgets their Google account login information or loses access to their device. Our step-by-step method will walk you through the most effective ways to bypass FRP on Itel S23+ devices in 2023, ensuring you can regain access to your device without any hassle. Say goodbye to FRP Xiaomi and Itel S23+ FRP challenges with our complete method.

We have included more than two ways to unlock your mobile without any hassle and complication. Just follow this guide, and you will regain access to your device in no time.

Part 1: Precautions To Take Before and After FRP Bypass?

Precautions are necessary for a safe and effective process when overcoming FRP (Factory Reset Protection) on your Itel S23+ device. In order to safeguard your data, guarantee device performance, and maintain device security, we’ll highlight the essential steps you should take before the Itel FRP bypass.

Precautions:

• Backup Your Data: In order to prevent data loss during FRP bypass, be sure to back up all vital information from your smartphone, including contacts, pictures, videos, and documents, to a secure location.
• Charge the battery: To prevent any delays during the FRP bypass procedure, ensure your device has enough battery life or is connected to a charger.
• **Conduct Thorough Research:**To prevent any potential threats or damage to your device, conduct thorough research and follow instructions from reliable sources or respected guidelines.

Part 2: How to remove Itel S23+ FRP with the most reliable software - Dr.Fone?

Wondershare Dr.Fone - Screen Unlock (Android) is well-known for its ease to use and data-security. The Unlock Android Factory Reset Protection feature helps you enter home screen without effort. Dr.Fone not only supports Itel FRP bypass, it also supports other device brands, such as Samsung , OPPO , etc.

Dr.Fone - Screen Unlock (Android)

Itel S23+ FRP Lock Removal Made Easy

• Pattern, PIN, password, fingerprints & face screen lock can all be unlocked.
• Bypass Android FRP lock without a PIN or Google account.
• Unlock mainstream Android brands like Samsung, Redmi, Xiaomi, etc.
• No tech knowledge required, Simple, click-through, process.

3,981,454 people have downloaded it

Check the following steps to see how to bypass Itel FRP with Wondershare Dr.Fone.

Step 1: Launch Wondershare Dr.Fone first and choose Toolbox > Screen Unlock > Android.

Step 2: Select Remove Google FRP Lock.

Step 3: Choose Itel among the Itel S23+ device brands.

Step 4: Dr.Fone will start to download driver. And then turn off the Itel S23+ device and connect to the computer. During the connecting process, please keep pressing Volume Up and Down button simultaneously for around 3 seconds.

Step 5: Wait for a few minutes and when it’s done, click Done button.

Part 3: How To Bypass Itel S23+ FRP in Traditional Method

With each phone, operating system, and version of Android having its own technique, bypassing Itel FRP on the most recent versions of Google’s operating system is becoming increasingly challenging. You can use the FRP bypass software that works with your device to employ the free FRP bypass approach.

• Click Add Network at the bottom of the screen in network settings.

• In the SSID field, type any random text you like and long-press to pick it. To share it with Gmail, tap the share icon. Tap Notifications > Additional Settings on the App Info screen.

• Click the three dots in the top right corner and select “Help and Feedback.”

• Open the search bar and type “Delete and disable apps on Android.” Tap “Tap to go to Application Settings” on the following screen.

• Enable the Accessibility Menu Shortcut by selecting Settings > Additional Settings > Accessibility > Accessibility menu.

• Repeat the back button to go back to the App info screen. Click More, then select Show System.

• Tap Disable and Disable app after choosing Android setup, then tap Force stop and OK.

• Return to the App info screen and select Carrier Services. Then, select Disable and Disable app. Finally, select Force to stop and OK.

• Go back to the App info screen, choose Google Play Services, and then touch Disable to remove the app. Click OK after tapping Force Stop.

• To get back to the Connect to the Network screen, press the back button and the Next icon.

• Tap the person icon in the lower-right corner of the screen to access Google Assistant > Settings on the Checking for Updates page. To access the Google Play services App information page, repeat this process numerous times. To enable Google Play Services, select Enable.
• Wait until the procedure is finished before going back to the Checking for Updates page. When the procedure is finished, select More, then select Accept.
• You can finally disable Xiaomi’s Google account verification when the Setup Complete page appears.

Part 4: How To Bypass Itel S23+ FRP With ADB Command on a PC?

ADB and Fastboots, which stand for Android Debug Bridge and Android Debug Bridge, respectively, are two ways that a computer can communicate with an Android smartphone. The commands and actions delivered by the system are carried out on your Android device using this technique.

Depending on the OS version, the Google FRP lock can be removed using a variety of commands using the flexible ADB command-line tool and Fastboots. This software uses a client-server architecture and a client that transmits commands.

• Download the ADB installed setup file first, and then extract the toolkit files to a folder on your computer.

• Run adb.setup.exe next, and then press Y to accept the prompt to install the ADB drivers.
• When the drivers have been successfully installed, type Y once more, and the command window will close.
• Next, please turn on your Android device and connect it to your PC using a USB cord. Ensure your Android device’s USB debugging mode is also on here.
• Then, while holding down the Shift key, right-click somewhere that is empty in the ADB folder and select the Open command window here.
• Then, to delete the FRP, run the following lines one at a time at the command prompt, pressing enter after each line. Below is the code for CMD.

• Your Android device’s FRP lock will be removed following the execution of the commands.

Part 5: How To Disable FRP Itel S23+?

Disabling FRP on Itel S23+/Poco devices is relatively simple. Once you’ve removed the Google account from your device, the FRP lock will be disabled, and you’ll no longer need to bypass Itel FRP.

• Go to “Settings” from the menu.
• Go down the page and click “Accounts & Sync.”

• To delete a Google account, tap on it.
• Confirm your selection of “Remove Account” by clicking.

• You might be asked to enter your device password or PIN to finish the process.

Summary

In conclusion, unlocking Itel S23+ FRP can be difficult, but it can be done quickly with the correct tools. You can either use the traditional method, which may prove quite long. We would recommend using the Itel FRP bypass tool. The top Itel S23+ Google FRP Unlock tools, such as Dr.Fone - Screen Unlock (Android) , have been covered in this article. Since Dr.Fone - Screen Unlock (Android) is an all-in-one solution for Samsung, Xiaomi, Redmi, Oppo, Realme, Vivo FRP unlocking, we advise readers to give it a try.

Itel S23+ ADB Format Tool for PC vs. Other Unlocking Tools: Which One is the Best?

In today’s digital era, efficient and secure data management is crucial. That’s where the Itel ADB Format Tool comes in handy! Itel ADB Format Tool for PC is one such Windows-based software that helps in unlocking patterns, passwords, and FRP locks from the Android-based Itel devices. In this post, we’ll guide you through its features, installation process, and usage. Additionally, we’ll explore the benefits it offers, how to troubleshoot common issues, and connecting it with other mobile unlocker solutions currently available; so you can decide which tool serves as the ideal solution for your needs!

The article below will let you learn all about this Itel unlock tool, and it’s working.

Part 1. What is Itel ADB Format Tool?

The Itel ADB Format Tool is a computer application designed to help you format and unlock your Itel device. It utilizes the Android Debug Bridge (ADB) protocol to communicate with your device and perform various operations, such as removing FRP (Factory Reset Protection) lock, deleting screen unlock patterns, and much more.

Itel ADB Format Tool 2021: Special Features

The Itel ADB Format Tool 2021 is a special function or software for Itel device users. This functional tool usually helps unlock passwords, any type of locks, or blocks. This software is not provided with the Itel S23+ device. It is an independent tool that offers an efficient solution for formatting and unlocking your Itel device. With a wide range of features, the Itel ADB Format Tool 2021 can greatly enhance your device usage experience.

• A Windows-based free tool that is easy to use.
• Works with all Itel phones running on Android 5.0 and above.
• Allows removing all types of screen locks as well as FRP locks on Itel phones.
• The interface is simple, which makes the tool apt even for users without much technical knowledge.
• A small-sized app that works on Windows 32-bit and Windows 64-bit systems without occupying much space.

Benefits of Using Itel ADB Format Tool

Using the Itel ADB Format Tool offers several benefits. Here are the key ones:

• Data Security and Privacy: This tool allows you to remove the FRP lock from your device, ensuring that your personal data remains safe in case of loss or theft.
• Efficient Device Formatting: The Itel ADB Format Tool provides a quick and efficient way to format your device, removing unwanted files, apps, and settings in just one click.
• Compatibility with Itel Devices: Specifically developed for Itel devices, this tool ensures a smooth and hassle-free interaction with your device.

Disadvantages of using Itel ADB Format Tool

Despite the numerous advantages, using the Itel ADB Format Tool also has some drawbacks. Here are a few:

• Data loss: If used improperly, this tool can lead to the loss of important data. It is therefore essential to back up the data before using the tool.
• Need for specific skills: Using the Itel ADB Format Tool requires a certain level of expertise and understanding of how Android devices work. For inexperienced users, this could pose a challenge.
• Risk of device damage: Improper use of the tool can result in device malfunction or even damage.
• Limited to Itel devices and Windows system only: This tool, being specifically developed for Itel devices, is not compatible with other brands of Android devices. Available for download only on the Windows system.

Important Note: The above guide for bypassing FRP lock using Itel ADB Format Tool should be used only by the real owners of the Itel device and for educational purposes. If you are using the guide above for unlocking a stolen phone, it is a serious and punishable crime, and you can also be jailed for this.

Part 2: What Can Itel ADB Format Tool Do?

Itel ADB format tool is small utility software for your Itel devices. It offers services like FRP lock removal and pattern lock removal. Here, FRP is factory reset protection, a built-in security feature for all Android devices to secure them against easy factory reset in case of illegal access to the Itel S23+ device.

1. Remove FRP Lock

But, sometimes, as the Itel S23+ device owner, we fall prey and forget the credentials that let us log in to our device. The Itel ADB Format tool is a program that helps you to troubleshoot and bypass the FRP lock on your Itel phone. You can use this tool to bypass the FRP lock or pattern security on your Itel phone and can also factory reset your phone. There are many Itel ADB format tools available online; let us show you how they generally work.

2. Remove Pattern Lock

Pattern locks are a very popular way of screen locking Itel phones; however, if you forget your pattern setting, you are in trouble. Itel ADB format tool can help you here for bypassing your pattern lock.

Part 3: How to Download and Bypass FRP with Itel ADB Format Tool?

The part below will help you to learn the process of downloading, installing, and using the Itel ADB Format Tool.

Download the Link for the Itel ADB Format Tool

You can obtain the Itel ADB Format Tool by clicking on the following download link: : Itel ADB Format Tool

How to Install Itel ADB Format Tool?

• Step 1. The Itel ADB Format Tool can be downloaded from the official site after which the file can be unzipped and installed on your Windows system.
• Step 2. Since the tool is only a few MBs in size, it will not occupy much space.
• Step 3. The guide instructions will appear on your screen, following which you can easily install the tool on your system.
• Step 4. Ensure that the USB drivers are installed on your system so that the Itel device can be connected smoothly to your PC.
• Step 5. Using the USB Driver, connect your Itel phone to your PC and then double-click on the tool.
• Step 6. On the main Itel ADB Format Tool interface, click on the Remove FRP Lock option.
• Step 7. The process will now take a few minutes, and after it is done, some Google credentials will be asked on the Itel S23+ device for logging in.

How Does the Process Work?

The steps for the working of the tool are enlisted below.

• Step 1. Switch off your Itel phone and ensure that VCOM and MTK drivers are present to enable the connection of the phone with the PC.
• Step 2. Press and hold the Power and Volume UP keys till the Recovery and Reboot options appear on the screen.
• Step 3. Select the Recovery option using the Volume Key and to confirm the same, use the Power key.
• Step 4. Next, tap on the Advanced button and then click on Reboot with ADB.
• Step 5. Connect your phone to your PC using a USB cable and switch on the Itel S23+ device.
• Step 6. Now, on your system, open Itel ADB Format Tool and enter the similar port number at the Itel S23+ device Manager at the tool.
• Step 7. To bypass the FRP lock, you need to click on the BTN2 button on your phone.
• Step 8. The process of bypassing the lock will complete as the Finish message appears.

The device will now boot up and all the data will be formatted.

Part 4: The Best Alternative to the Itel ADB Format Tool [Remove Pattern & FRP Lock, highest success rate]

The Itel ADB Format Tool is a utility primarily used for formatting Itel devices, removing screen locks, and bypassing FRP locks. While it has served its purpose for many Itel users, it does come with limitations. Users often find it challenging to use, especially if they are not tech-savvy. Additionally, the tool may not be compatible with all Itel models and Android versions.

The Best Alternative: Dr.Fone - Screen Unlock (Android)

Dr.Fone - Screen Unlock (Android) stands out as an excellent alternative to the Itel ADB Format Tool. Developed by Wondershare, a trusted name in the software industry, this tool offers a user-friendly interface and a higher success rate in bypassing Itel FRP locks and removing patterns. Dr.Fone provides a simple and intuitive interface that even beginners can navigate effortlessly. The step-by-step process ensures that you can bypass FRP locks and remove patterns with ease. Here are some key reasons why Dr.Fone is the best choice:

Dr.Fone - Screen Unlock (Android)

The Best ADB Alternative Itel Pattern Unlock Tool

• 4 screen lock types are available on your Vivo: pattern, PIN, password & fingerprints.
• Bypass Android FRP lock without a PIN or Google account.
• Everybody can handle it without any technical background. Dr.Fone offers 24/7 customer support to assist you throughout the unlocking process.
• Dr.Fone boasts a high success rate in bypassing FRP locks and removing patterns, ensuring that you can access your Itel device quickly.

4,008,671 people have downloaded it

How to Bypass Itel FRP Lock and Remove Pattern with Dr.Fone?

Here is a step-by-step guide on how to use Dr.Fone - Screen Unlock (Android) to bypass Itel FRP locks and remove patterns:

• Step 1. Begin by downloading and installing Dr.Fone - Screen Unlock (Android) on your computer. Launch the program and select “Screen Unlock” from the main menu.

• Step 2. Using a USB cable, connect your phone to your PC and Choose either “Remove Screen Lock” or “Remove Google Lock (FRP)” based on your specific situation.

• Step 3. Dr.Fone will guide you through the process of unlocking your device. Simply follow the on-screen instructions, and the software will take care of the rest.

• Step 4. Once the process is complete, your Itel device will be unlocked, and you can regain access without any pattern or FRP lock hassles.

Part 5. Itel ADB Format Tool vs. Dr.Fone - Screen Unlock: A Comparison

In this part, we’ll compare two popular solutions in the market - Itel ADB Format Tool and Dr.Fone - Screen Unlock (Android), to determine which one takes the crown for being the most efficient, user-friendly, and cost-effective option for Itel users.

Name	Itel ADB Format Tool	Dr.Fone - Screen Unlock (Android)
Ease of Use	This tool is straightforward. Even if you’re a first-time user, you’ll easily grasp how to navigate the tool due to its minimalistic layout and clearly defined functions.	Compared to the Itel ADB Format Tool, Dr.Fone offers a more polished user interface. It provides step-by-step instructions making the unlocking
Features	This tool allows users to bypass FRP and Pattern lock from Itel phones, providing a quick solution to unlock the Itel S23+ device.	Dr.Fone - Screen Unlock (Android) removes pattern, PIN, password, and fingerprint screen locks, bypasses Android FRP lock without a PIN or Google account, and unlocks major Android brands such as Samsung, Vivo, Xiaomi, and more.
Compatibility	Designed exclusively for Itel smartphones (Requires Android OS 5.0 or later), this tool is tailored to operate solely on Windows systems.	Dr.Fone extends its support beyond Vivo, covering a range of other brands like Samsung, LG, Motorola, and more (Requires Android OS 2.1 or later). It is versatile, applicable to both Windows and Mac systems.
User Reviews	Users commend its simplicity and effectiveness. However, some users have expressed disappointment due to its limited compatibility.	It has positive reviews for its extensive features and wide compatibility. Some users, however, find it a bit expensive.
Pricing	One of its major selling points is that it’s completely free.	It offers a free trial, but the full version comes at a price. However, considering the vast array of features, it offers value for money.
User Testimonials and Case Studies	One user stated, “I got locked out of my Itel phone and this tool was a lifesaver. It’s simple and efficient. I just wish it supported other brands as well”.	A satisfied customer shared, “Dr.Fone is more than just an unlocking tool. It’s a complete package. The price is worth it considering the features it offers.”

Both tools serve their purpose effectively. If you’re looking for a free and simple solution specifically for Itel smartphones, Itel ADB Format Tool is your go-to option. However, if you want a comprehensive software suite that serves multiple purposes and supports a wide range of brands, Dr.Fone - Screen Unlock (Android) is worth considering. Remember, the best tool depends on your specific needs and budget.

Part 6. FAQs about the Itel ADB Format Tool

1. Is the Itel ADB Format Tool safe to use?

Yes, it is safe to use. However, it is recommended to back up your data before using it.

2. For which Itel model devices is ADB Format Tool compatible?

No need to fret – the tool supports almost all Android models. Specifically, it is confirmed to work with the Itel V series, Itel Y series, Itel Z series, Itel S series, and other latest devices. However, for older series Itel devices, we cannot provide a guarantee. In such instances, it is advisable to reach out to customer care or seek assistance online.

3. Can I run the Itel ADB format tool on mac?

While the Itel ADB Format Tool is designed for Windows, if you’re a Mac user looking for a reliable screen unlocking solution, considerDr.Fone - Screen Unlock (Android) . It’s a versatile tool compatible with both Windows and Mac operating systems, ensuring a seamless experience for users on either platform. This recommendation aligns with your need for a Mac-compatible screen unlock tool.

Conclusion

ADB Format Tool for PC is a decent tool for trying to bypass the FRP lock on your Itel devices. If you are looking for software that can let you remove all types of screen locks not only on Itel but on an array of other Android devices, Dr.Fone - Screen Unlock (Android) is an excellent choice.

Tips: The need for bypassing the FRP lock arises in the situation when a factory reset of the Itel S23+ device has to be done. In general situations, the most common lock that needs to be bypassed is the screen lock on your Itel and other devices. People keep a lock on their phone screen using a PIN code, passcode, pattern, fingerprint, or a face code to prevent its access from unauthorized people. Forgetting these locks is one of the most common issues which results in making your device not usable.

In such conditions, you would need a reliable tool that can help you bypass the screen lock, and here are 100% vote goes to  Dr.Fone - Screen Unlock (Android) which is PC-based and Mac-based software that is capable of bypassing all types of screen locks on your Android devices in a simple, quick manner. Compatible with all popular Android devices including Samsung, LG, Xiaomi, Oppo, Vivo, and many others, the tool works even on the latest Android version. Simple steps, intuitive interface, and quick process make Dr.Fone - Screen Unlock (Android) the favorite software among the users.

Also read: